I | BATTERY INSTALLATION |
|
|
IMPORTANT! Use only a Power Wheels® 6 volt
Pretend Motor
1 |
•Grasp the bottom edge of the grill and lift the hood.
•Remove the two screws in the pretend motor.
•Remove the pretend motor.
Battery
3 | Motor Harness |
|
Connector | Battery Connector |
•Plug the motor harness connector into the battery connector. Push firmly to make sure the connector is inserted properly.
4
Pretend Motor
2 Battery Retainer
•Push the battery retainer and fit the battery into the pocket.
•Release the battery retainer.
•Replace the pretend motor.
•Replace the two #8 x 3/4" screws into the pretend motor and tighten.
•Lower the hood and “snap” in place.
20 | |
|
|