Kenmore 790.4422 manual Locking the controls, Single Radiant Element

Page 9

Setting Surface Controls

Locking the controls

The Cooktop Controls can be locked in order to prevent the cooktop from accidentally being turned ON. This feature

can be activated only when no cooking zone is active. If the cooktop is in use, it will not be possible to loci< the controls.

To Turn ON the Controls Lock Feature:

Touch and hold the _ key pad. After a few seconds a beep will

sound. The Loci< Indicator Light above the _k_ key pad will turn ON indicating the cooktop is locked. This will keep any Cooking Element or Cooktop functions from being accidentally turned ON. Note: If the cooktop is in use when the Control Lock Feature is activated, the command will be ignored.

To Turn OFF the Controls Lock Feature:

Touch and hold the _ key pad. After a few seconds a

beep will sound. The Loci< Indicator Light above the _k_ key pad will turn OFF indicating the cooktop is unlocked. The Cooking Elements or any of the other Cooktop functions may now be used.

Single Radiant Element

The cooktop provides single radiant element located as

illustrated. Use the following instructions when operating these elements.

To Operate the Single Radiant Surface Elements:

1.Place correctly sized cookware on the radiant surface element.

POWER

2.Touch and hold the On/Off pad until a beep sounds. The power indicator light will turn ON. Note: If no key pad is touched within 10 seconds the request to Power ON

the cooktop will dear.

ON

3.Touch and hold OFF pad for the desired element position until a beep is heard. The element display will show "0". Note: If no further pads are touched within 10 seconds the request to power the element ON will dear.

4.Touch A pad once to turn ON the power level to 9

[Hi). Touch V pad once for [Lo).

5.Each touch of the A or V pad will increase or decrease the power level from I through 9. Half power levels (available between 1 and 7 power level) are indicated by lighting the display decimal point. Note: The power level may be adjusted at any time while the element is ON.

ON

6.When cooking has been completed touch the OFF pad once to turn the element OFF and if no other surface

POWER

element is used touch the oo/off key pad to turn off: the

cooktop. Note: The H (hot element) message will remain ON if the cooktop is still hot and will remain ON until the heating surface area has cooled sumciently.

Hot Element Indicator Message

After using any of the radiant element positions the cooktop will become very hot. Even after setting the controls to OFF, the cooktop will remain hot for some time. The cooktop control monitors the temperature of the cooktop and element display shows the message '"H"(hot element) warning when the cooktop is still too hot to touch. If the H message appears in the element window, the control can still be turned on again for use.

Radiant surface elements may appear to have cooled after they have been turned off:. The glass surface may still be hot and burns may occur if the glass surface is touched before it has cooled sufficiently.

Do not place alumlnum foil, plastic items such as salt and pepper shakers, spoon holders or plastic wrappings on top of the range when it is in use. These items could melt or ignite. Potholders, towels or wooden

spoons could catch fire if placed too dose to the surface elements.

Important notes:

°Start most cooking operations on a higher setting and then turn to a lower setting to finish cooking.

°For efficient cooking, turn the surface element OFF several minutes before cooking is complete. This will allow residual heat to complete the cooking process.

°A glowing red surface heating area extending beyond the bottom edge of the cookware indicates the cookware is too small for the surface heating area.

°Radiant elements have a limiter that allows the radiant heating element to cycle ON and OFF, even at the 9 (hi) setting. This helps prevent damage to the ceramic

cooktop. Cycling at the 9 (HI) setting is normal and will occur more often if the cookware is too small for the

radiant element or if the cookware bottom is not fiat.

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Rrll Contents Edition and local code requirements. Install When heating fat or grease, watch it closelyKnow which touch pad controls each surface unit Serial Plate Location Product RecordUse Proper Pan Size. This Is locatedAt 2 or 3 locations 6A & 7 Single Element ControlsMain Cooktop Double Element Controls BridgeSurface Cookware Using WoksSelecting Surface Cooking Cookware Cookware Material typesGeneral Cooktop Information Setting Surface ControlsAbout the Radiant Surface Elements Locations of the Radiant Surface ElementsLight Indicators Displayed by Main Control Setting Surface ControlsAvailable Window Display Settings Hot Surface IndicatorsLocking the controls To Turn on the Controls Lock FeatureSingle Radiant Element To Operate the Single Radiant Surface ElementsDouble Radiant Element To Operate the Double Radiant ElementMay still To Turn the Warm & Hold Feature on Warm & Hold FeatureCleaning Various Parts of Your Cooktop General Care & CleaningSurfaces How Fo Clean Ceramic Glass Cooktop Cleaning & MaintenanceCare and Cleaning of Stainless Steel some Cleaning Recommendations for the CeramicSpeclal Coutlon for Aluminum Foll and Aluminum Cooking Aluminum utensilsBeFore You Call Master Protection Agreements Protection AgreementsOur Home Your HomeCanada Call anytime, day or night U.S.A. and Canada

790.4422 specifications

The Kenmore 790.4422 is a high-performance range that embodies a perfect blend of style, functionality, and innovative technology, making it a popular choice for both amateur cooks and seasoned chefs. With a sleek stainless steel finish, this model not only enhances the aesthetic appeal of any kitchen but also offers robust features that cater to diverse cooking needs.

One of the standout characteristics of the Kenmore 790.4422 is its versatile cooking options. The range is equipped with a powerful gas cooktop that includes five burners with varying BTU outputs, allowing users to handle everything from delicate simmering to high-heat frying. The included multi-ring burners provide flexibility; you can switch between different heat settings to suit various cooking techniques.

The oven features a sizeable capacity which permits cooking multiple dishes simultaneously—ideal for family gatherings or dinner parties. This model is equipped with an innovative convection baking system that circulates hot air throughout the oven for even cooking and browning. The convection feature not only ensures optimal heat distribution but also significantly reduces cooking times, making meal preparation more efficient.

Another notable technology found in the Kenmore 790.4422 is the self-cleaning function. It utilizes high temperatures to burn off food residue, allowing for effortless maintenance and saving time for users who want to keep their kitchen appliances in pristine condition. Furthermore, the range includes a digital oven control panel that simplifies setting temperatures and times, ensuring precision with every recipe.

In terms of safety, the Kenmore 790.4422 comes with features that prevent accidents during use. It has an auto shut-off function that enhances safety by turning off the oven after a set period, providing peace of mind for users.

With its sleek design, powerful cooking capabilities, and modern technologies, the Kenmore 790.4422 stands out in the crowded market of kitchen ranges. Whether you’re baking, broiling, or frying, this appliance delivers reliable performance and ease of use, making it an excellent choice for any home chef looking to elevate their cooking experience.
Top Page Image Contents