Setting Oven Controls
Note: The time of day must first be set in order to operate the oven.
To Set the Clock
When the range is first plugged in, or when the power supply to the range has been interrupted, the display will flash "12:00".
1.Press .
2.Within 5 seconds, press and hold the or until the correct time of day appears in the display.
To Set the Minute Timer:
1.Press .
2.Press the to increase the time in one minute
increments. Press and hold the to increase the time in 10 minute increments. The timer can be set for any amount of time from 1 minute to 11 hours and 59 minutes.
Note: If you press the first, the timer will advance to 11 hours and 59 minutes.
3.The display shows the timer count down in minutes until one minute remains. Then the display will count down in seconds.
4.When the set time has run out, the timer will sound a 3
second beep. 0:00 will appear in the display until is pressed.
Note: While the minute timer is counting down, the “:” will flash. The minute timer does not start or stop cooking. It serves as an extra timer in the kitchen that will beep when the set time has run out. The minute timer can be used alone or during any of the other oven functions. When the minute timer is in use with any other function, the minute timer will be shown in the display. To view other functions, press the pad for that function.
To Change the Minute Timer while it is in use: While the timer is active and shows in the display, press
and hold the or to increase or decrease the time.
To Cancel the Minute Timer before the set time has
run out: Press .
Changing the Temperature Display Mode
(some models)
The electronic oven control temperature display mode was factory preset to display (Fahrenheit) °F oven tempertaures. Note: Oven cooking temperatures may be set from 170°F to 500°F (77°C to 260°C).
To change the Temperature Display Mode to °C (Celsius) or from °C to °F (do not use Bake or Broil while changing the Temperature Display Mode):
1.Press & hold the key pad for
C appears in the display. Note: At this time the display
will show the current Temperature Display Mode whether set for F or C .
2.Press the key pad once to choose the (Fahrenheit) °F mode; or press the key pad once to choose the (Celsius) °C mode.
3.After 5 seconds, the display will flash. To accept the change, wait 5 more seconds until the oven control beeps once. To complete the change skip step 4 below, OR;
4.If at any time during the process of changing the Temperature Display Mode (F or C ) you decide the
change is not desired, press the key pad before the oven control beeps once to cancel the process.
5.The control will beep once. The display will then return to the time of day with any temperature display mode change you may have requested.
To Set or Change the Temperature for Baking
The oven can be programmed to bake at any temperature from 170°F to 500°F.
To Set the Controls for Baking:
1.Press . "— —
2.Within 5 seconds, press the or . The display
will show "350°F." By pressing and holding the or
, the temperature can then be adjusted in 5°F increments.
3.When the or is released, the oven will begin heating to the selected temperature. When the displayed temperature reaches the desired baking temperature, the control will beep one (1) time.
4.To cancel the baking function, press .
To Change the Oven Temperature after Baking has Started:
1.Press and make sure the bake temperature is displayed.
2.Press the or to increase or decrease the set temperature.
8