Avanti W798SS-1 FUNCTION

SPIN ONLY

 Press down the power button.

 Press the wash button until all wash indicators are OFF.

 Press the rinse button until all rinse indicators are OFF.

 Press the spin button to select the spin time.

 Press the START/HOLD to start the course. And the LED display will show the remaining time of

the entire course.

FUNCTIONS

Each wash set is programmed in the computer; see the details in the wash program chart.

Press down each button within 5 minutes since the program will reset the process group. Then press

down STRAT/HOLD button to re-start the washing machine. If not, the washing machine will shut

down automatically.

Close the lid, or the washing machine will not operate.

In case the unbalance of load triggers the safety switch when spinning, the washing machine will

automatically refill water to adjust the balance.

Note:

 Clothes easily discolored should be washed separately so as to prevent inter-dyeing.

 If you want to change a selected program, please press the START/HOLD button first, then press

the Program button before pushing START/HOLD button.

 When Rinse & Drain program is ON, do not use detergent.

 If you want to drain water during washing, press the START/HOLD button, then select Rinse and

Drain program. Press START/HOLD button again to restart.

DELAY START SETTING

Select this course when you have to go out or do something else.

 Press down the power button.

 Load the washing machine and select the appropriate wash program.

 Press PRESET button continuously to select the delay start time. (From 1 hour to 24 hours)

 Close the lid completely.

 Press START/HOLD button to start the course.

CHILDREN-PROOF SETTING

Select the function, the program will hold the washing machine and give out alert voice once the lid is

opened when washing. And the washing machine will automatically drain water and give alarm if the

lid is not closed in 10 seconds. In case a child falls into the washing machine when he plays around,

he will be in safe status.

 Press down the power button.

 Select the appropriate program and press START/HOLD button to start the washing machine.

 The washing machine buzzer will give out music and the digital indicator show . This time you

must decide whether to select the function or not.

FUNCTION SOAK WASH RINSE SPIN TOTAL TIME

(Approx.)

NORMAL 12 Min. 1 Cycle 5 Min. 35 Min.

SOAK 20 Min. 12 Min. 2 Cycles 5 Min. 66 Min.

SPEEDY 6 Min. Spray Rinse + 1 Cycle 3 Min. 33 Min.

JEANS 12 Min. Spray Rinse + 2 Cycles 5 Min. 52 Min.

GENTLE 12 Min. 2 Cycles 3 Min. 44 Min.

HEAVY 12 Min. Spra

Rinse + 2 C

cles 5 Min. 58 Min.

DELICATES 6 Min. 2 Cycles 3 Min. 38 Min.

SPRAY RINSE 12 Min. Spray Rinse + 2 Cycles 5 Min. 58 Min.