IMPORTANT SAFETY INSTRUCTIONS
WARNING | To reduce the risk of fire, electrical shock, or |
| injury when using your portable washer, follow |
| these basic precautions: |
∙Read all instructions before using the portable washer.
∙Do not wash articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline,
∙Do not add gasoline,
∙Under certain conditions, hydrogen gas may be produced in a
∙DANGER or WARNING: Risk of child entrapment.
Child entrapment and suffocation are not problems of the past. Junked or abandoned appliances are still dangerous . . . even if they will “just sit in the garage a few days.”
∙Before you throw away your old portable washer: Take off the lid.
∙Never allow children to operate, play with, or crawl inside the portable washer. Close supervision of children is necessary when the washer is used near children.
∙Do not reach into the washer if the agitator or inner tub is moving.
∙Do not tamper with controls.
∙Do not repair or replace any part of the washer or attempt any servicing unless specifically recommended in the
∙Never clean portable washer parts with flammable fluids. The fumes can create a fire hazard or explosion.
∙Do not place the washer in steamy rooms or where the washer is directly exposed to rain. Moisture may destroy the electrical insulation causing an electrical shock hazard.
∙Do not store, use gasoline, or any other flammable vapors and liquids in the vicinity of this or any other portable washer. The fumes can create a fire hazard or explosion.
∙If the power cord is damaged, it must be replaced by the manufacturer or its service agent or a similar qualified person in order to avoid a hazard.
INSTALLATION INSTRUCTIONS
BEFORE USING YOUR PORTABLE WASHER | SCREWDRIVER | |||
∙ Remove the exterior and interior packing. | ||||
|
| |||
∙ You will need the following tools: |
|
| ||
∙ | Wrench |
|
| |
∙ | Pliers |
|
| |
∙ | Screwdriver |
|
| |
∙ Check to be sure you have all of the following parts: | WRENCH | PLIERS |
∙2 Inlet Hoses
∙2 Faucet Adapters
∙1 Noise Proof Plate With Screws
∙4 Casters
∙Remove shipping brace. Note - It should be saved and used (to prevent damage to washer components) whenever washer is moved or transported to a new location.
∙Clean the interior surface with lukewarm water using a soft cloth.
∙Allow 2 inches of space between the back and sides of the appliance.
5