Setting Surface Controls
Do not place plastic
items such as salt and pepper shakers, spoon holders or plastic wrappings
on top of the range when it is in use. These items could melt or ignite. Potholders, towels or wood spoons couJd catch fire if placed too close to a flame.
In the event of an electrical power outage, the surface burners can be lit manually. To light a surface burner, hold a lit match
to the burner head, then slowly turn the surface control knob to LITE. After burner
lights push in and turn knob to desired setting. Usecaution when lighting surface burners manually.
Setting Surface Controls
Your range may be equipped with different sized surface burners. The ability to heat food quicker and in larger volumes increases as the burner size increases.
The simmer burner (if equipped) is best used for simmering delicate sauces, etc.
The standard burners can be used for most surface cooking needs.
The Power burners (if equipped) are best used for bringing large quantities of liquid to temperature and when preparing larger quantities of food.
Regardless of size, always select cookware that is suitable for the amount and type of food being prepared. Select a burner and flame size appropriate to the pan. Never allow flames to extend beyond the outer edge of the pan.
Operating the Gas Surface Burners:
1.Place cooking utensil on surface burner.
2.Push the surface control knob in and turn countercJockwise out of the OFF position.
3.Release the knob and rotate to the MTE position. Note: All four electronic surface ignitors will spark at the same time. However, only the burner you are turning on will ignite.
3.Visually check that the burner has lit.
4.Push the control knob in and turn counterclockwise to the desired flame size. The control knobs do not have to be set at a particular setting. Use the guides and adjust the flame as needed. DO NOT cook with the surface control knob in the LITE position. (The electronic ignitor will continue to spark if the knob is left in the LITE position.)
Setting Proper Surface Burner Flame Size
For most cooking, start on the highest control setting and then turn to a lower one to complete the process. Use the recommendations below as a guide for determining proper flame size for various types of cooking. The size and type of
CORRECT utensil used and the amount of food being cooked will influence the setting needed for cooking.
*Flame Size
High Flame
Medium Flame
Low Flame
Type of Cooking
Start most foods; bring water to a boil; pan broiling. Maintain a slow boil; thicken sauces, gravies; steaming. Keep foods cooking; poach; stewing.
Never extend the flame beyond the outer] edge of the utensil. A higher flame simply / wastes heat and energy, and increases / your risk of being burned by the flame. J
*These settings are based on using
For deep fat frying, use a thermometer and adjust the surface control knob accordingly. If the fat is too cool, the food will absorb the fat and be greasy. If the fat is too hot, the food will brown so quickly that the center will be undercooked. Do not attempt to deep fat fry too much food at once as the food will neither brown nor cook properly.