Kenmore 790.924, 790.923, 790.922, 790.921 manual Changing temperature display F or C, Setting Timer

Page 15

Setting Oven Controls

Changing temperature display (°F or °C)

The electronic oven control is set to display °F (Fahrenheit) when shipped from the factory. The display may be changed to show either Fahrenheit or Celsius oven temperatures.

To change temperature display mode from °F to °C (Celsius) or from °C to °F (Fahrenheit):

1.Press Broil key pad. — — appears in the display.

2.Press and hold until HI appears in display.

3.Press and hold Broil key pad until F or C appears in the display.

4.Press either or key pad to toggle between F (Fahrenheit) or C (Celsius) mode choices. Release key pad when desired mode is displayed.

5.To accept selection, press any control key pad once. The display will return to the time of day.

Important note:

The temperature display mode cannot be changed when the oven is set for cooking or Select Clean is active.

Changing between continuous bake setting or 12-Hour Energy Saving feature

The oven control has a factory preset 12-Hour Energy Saving feature that will turn the oven off automatically if the oven is left on for more than 12 hours. The control may be programmed to override this feature to continuously bake.

To change to continuous bake mode:

Press and hold Timer Set/Off key pad until the control beeps once (about 6 seconds). - - hr will appear in display indicating the control is now set for continuous bake setting.

To change to 12-Hour Energy Saving feature:

Press and hold Timer Set/Off key pad until the control beeps once (about 6 seconds). 12hr will now appear in display indicating the control is set for 12-Hour Energy Saving feature.

Important note:

Changing between continuous bake or the 12-Hour Energy saving mode does not change how the cooktop controls operate.

Setting Timer

The timer allows you to track your cooking times without interferring the cooking process. The timer may be set from 1 minute up to 11 hours and 59 minutes.

To set the timer:

1.Press Timer Set/Off key pad.

2.Press the to increase the time in one minute

increments. Press and hold to increase the time in

10 minute increments. Release when the desired time appears in the display. The timer will begin to count down.

3.When the set time has run out, the Timer will sound with 3 beeps and will continue to beep 3 times every 60 seconds until Timer Set/Off key pad is pressed.

To change time remaining in Timer:

While the timer is active, press and hold the or key pad to increase or decrease any time remaining.

To cancel the Timer before the set time has run out: Press Timer Set/Off key pad once.

Important notes:

•The timer does not start or stop the cooking process. It serves as an extra timer in the kitchen that will beep when the set time has run out. The timer may be used alone or when any other oven function is active.

•The indicator light located above the Timer Set/Off key pad will glow when the timer is active.

•The timer will display hours and minutes until 1 hour remains. When less than 1 hour remains, the display will count down in minutes and seconds. Once the timer has less than 1 minute remaining only seconds will display.

•If the timer is active when oven cooking, the minute timer will show in the display by default. To view information of any other active oven function, press the key pad once for the active function to view status.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Use & Care Guide Guía de uso y cuidada KenmoreKenmore Limited Warranty Table of ContentsRead all instructions before using this appliance Tip Over HazardSave these instructions for future reference Important Instructions for Using Your Oven Important Instructions for Using Your Cooktop Model No Serial No Product RecordSerial Plate Location 790Offset Oven rack Types of oven racksAir circulation in the oven Baking layer cakes with 1 or 2 oven racksImportant note Before Setting Surface ControlsUsing proper cookware Cookware material typesElement On & Hot Surface indicator lights About the ceramic glass cooktopAbout the radiant surface elements Turbo Boil feature on some models Types of cooktop surface elementsHome Canning To operate the single radiant element Setting Surface ControlsRadiant surface element settings Single radiant surface elements all modelsAreas that heat are shown darkened To operate the dual radiant elementHeating with inner Small element onlySetting warmer zone control Warmer zone recommended food settingsWarm & Ready Zone some models Oven Control Functions Setting Oven ControlsSetting Clock Setting silent or audible control modeSetting Timer Changing temperature display F or COven Lockout Setting BakeSetting Cook Time When the cook time runs outUntil is pressed Setting Delay Start Suggested broil settings table electric oven BroilTo set Broil Press Bake key pad Adjusting oven temperatureTo adjust oven temperature Operating oven light on some modelsTo set Select Clean to start immediately Select CleanRead before starting Select Clean Setting Select CleanDelayed Start Select Clean When Select Clean is finishedTo set Delay Start Select Clean Cleaning recommendation table Care & CleaningCooktop cleaning Cooktop maintenanceGeneral cleaning Aluminum foil and utensilsDo not use the following on the cooktop Replacing oven light Cleaning oven bottom on some modelsTo replace oven door Removing and replacing the lift-off oven doorSpecial door care instructions To remove oven doorProblem Solution Section Any F code errorSelect Clean does not work Select CleanCare and Cleaning section of this Use & Care Guide SurfaceAreas of discoloration with metallic Protection Agreements Acuerodes de protección
Top Page Image Contents