Kenmore 790.922, 790.923, 790.921 manual Read before starting Select Clean, Setting Select Clean

Page 21

Select Clean

Aself-cleaning oven cleans itself with high temperatures (well above normal cooking temperatures) which eliminate soils completely or reduces them to a fine powdered ash you can wipe away aftwerwards with a damp cloth.

The Select Clean function allows you to select 3 different cleaning times from 2, 3 or 4 hours. A 3-hour cleaning time is best used for normal cleaning; 2-hour time for light soils and a 4-hour clean time for heavier stubborn soils.

Read before starting Select Clean

Be sure to read all the following caution and important statements BEFORE starting a self-clean cycle:

DO NOT leave small children unattended near the appliance. During the self-cleaning cycle, the outside of the range can become very hot to touch and can cause burns.

DO NOT line the oven walls, racks, bottom or any other part of the range with aluminum foil. Doing so will destroy heat distribution, produce poor baking results and cause permanent damage to the oven interior. Aluminum foil will melt to the interior of the oven.

The health of some birds is extremely sensitive to the fumes given off during the self-cleaning cycle of any range. Move birds to another well-ventilated room.

DO NOT force the oven door open. This can damage the automatic door locking system.

Use caution when opening the oven door after self-cleaning. The oven may still be VERY HOT and can cause burns. To avoid possible burns stand to the side of the oven when opening the oven door to allow hot air or steam to escape.

Important notes:

•Completely remove ALL OVEN RACKS and ANY

ACCESSORIES FROM OVEN CAVITY to avoid damage to oven racks. If the oven racks are not removed they may discolor.

•Remove ALL items from the oven and cooktop including cookware, utensils and ANY ALUMINUM FOIL. Aluminum foil will not withstand high temperatures from a self-clean cycle and will melt.

•DO NOT use oven cleaners or oven protective coatings in or around any part of the oven interior.

•Clean any soil from the oven frame, the door liner outside the oven door gasket and the small area at the front center of the oven bottom (See Fig. 1). These areas heat sufficiently to burn soil on. Clean using soap and water prior to starting Select Clean (See Fig. 1).

•Remove any excessive spillovers. Any spills on the oven bottom should be wiped-up and removed before starting a self-clean cycle. To clean, use hot, soapy water and a cloth. Large spillovers can cause heavy smoke or fire when subjected to high temperatures. DO NOT allow food spills with a high sugar or acid content (such as milk, tomatoes, sauerkraut, fruit juices or pie filling) to remain on the surface as they may leave a dull spot even after cleaning.

•DO NOT clean the oven door gasket (See Fig. 1). The woven material of the oven door gasket is essential for a good seal. Care should be taken not to rub, damage or remove the gasket. DO NOT use any cleaning materials on the oven door gasket. Doing so could cause damage to the door gasket.

Fig. 1

Setting Select Clean

To set Select Clean to start immediately:

1.Be sure the oven is empty and ALL oven racks are removed. Remove all items from the cooktop. Be sure oven door is completely closed.

2.Press Select Clean key pad. — — — appears in the display.

3.Press or once. 3:00 appears in the display indicating the default 3 hour clean time is selected. To

change to a 2 hour clean time press ; "2:00" appears in the display. To select a 4 hour clean time

press ; "4:00" appears in the display.

4.After selecting the clean time Select Clean will activate. The DOOR LOCKED indicator light will glow and CLn will appear in the display.

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Use & Care Guide Guía de uso y cuidada KenmoreKenmore Limited Warranty Table of ContentsRead all instructions before using this appliance Tip Over HazardSave these instructions for future reference Important Instructions for Using Your Oven Important Instructions for Using Your Cooktop Serial Plate Location Product Record790 Model No Serial NoAir circulation in the oven Types of oven racksBaking layer cakes with 1 or 2 oven racks Offset Oven rackUsing proper cookware Before Setting Surface ControlsCookware material types Important noteElement On & Hot Surface indicator lights About the ceramic glass cooktopAbout the radiant surface elements Turbo Boil feature on some models Types of cooktop surface elementsHome Canning Radiant surface element settings Setting Surface ControlsSingle radiant surface elements all models To operate the single radiant elementHeating with inner To operate the dual radiant elementSmall element only Areas that heat are shown darkenedSetting warmer zone control Warmer zone recommended food settingsWarm & Ready Zone some models Setting Clock Setting Oven ControlsSetting silent or audible control mode Oven Control FunctionsSetting Timer Changing temperature display F or COven Lockout Setting BakeSetting Cook Time When the cook time runs outUntil is pressed Setting Delay Start Suggested broil settings table electric oven BroilTo set Broil To adjust oven temperature Adjusting oven temperatureOperating oven light on some models Press Bake key padRead before starting Select Clean Select CleanSetting Select Clean To set Select Clean to start immediatelyDelayed Start Select Clean When Select Clean is finishedTo set Delay Start Select Clean Cleaning recommendation table Care & CleaningCooktop cleaning Cooktop maintenanceGeneral cleaning Aluminum foil and utensilsDo not use the following on the cooktop Replacing oven light Cleaning oven bottom on some modelsSpecial door care instructions Removing and replacing the lift-off oven doorTo remove oven door To replace oven doorProblem Solution Select Clean does not work Any F code errorSelect Clean SectionCare and Cleaning section of this Use & Care Guide SurfaceAreas of discoloration with metallic Protection Agreements Acuerodes de protección
Top Page Image Contents