Manually Configuring your Modem
Parameter | Description |
|
|
IP Address | The IP address of the Modem. |
|
|
IP Subnet Mask | The subnet mask of the Modem. |
|
|
DHCP Server | To dynamically assign an IP address to client PCs, |
| enable the DHCP (Dynamic Host Configuration |
| Protocol) Server. |
|
|
Lease Time | Set the DHCP Lease Time |
|
|
DHCP Option | If you wish you can Specify the Name of your |
60 Vendor ID | DHCP Server (Optional) |
|
|
Lease Time | Specify the length of time that the DHCP will |
| assign an IP address to a computer for. |
|
|
Start IP | Specify the start IP address of the DHCP pool. |
| Do not include the gateway address of the |
| Modem in the client address pool. (See “TCP/IP |
| Configuration”). If you attempt to include the |
| Modem gateway address (10.1.1.1 by default) in |
| the DHCP pool, an error dialog box will appear. |
| If you change the pool range, make sure the first |
| three octets match the gateway’s IP address, i.e., |
| 10.1.1.xxx. |
|
|
End IP | Specify the end IP address of the DHCP pool. |
|
|
Domain Name | If your network uses a domain name, enter it here. |
| Otherwise, leave this field blank. |
|
|
Manually Configuring your Modem
DHCP Client List
The DHCP Clients List displays the IP Address, Host Name and MAC Address of each client that has requested an IP address since the last reboot of the Modem. Check the FIX box to have the IP address and the MAC address linked so that the IP address will always be assigned as it is on this screen.
NAT
From this section you can configure the Virtual Server, and Special Application features that provide control over the TCP/ UDP port openings in the Modem’s firewall. This section can be used to support several Internet based applications such as web, email, FTP, and Telnet.
NAT Settings
NAT allows one or more public IP addresses to be shared by multiple internal users. You can enable
or disable NAT here. Recommended setting = Enable.
1
2
3
4
5
6
7
section
28 | 29 |
