Manually Configuring your Modem
Menu Description
Menu | Description |
|
|
System | Sets the local time zone, the password for |
| administrator access, the IP address of a PC that |
| will be allowed to manage the Modem remotely, |
| and the IP address of a Domain Name Server. |
|
|
WAN | Specifies the Internet connection settings. |
|
|
LAN | Sets the TCP/IP configuration for the Modem LAN |
| interface and DHCP clients. |
|
|
NAT | Shares a single ISP account with multiple users, |
| sets up Port forwarding. |
|
|
Route | Sets routing parameters and displays the current |
| routing table. |
|
|
Firewall | Configures a variety of security and specialized |
| functions including: Access Control, URL blocking, |
| Internet access control scheduling, Intruder |
| detection, and DMZ. |
|
|
ADSL | Sets the ADSL operation type and shows the |
| ADSL status. |
|
|
UPnP | Configures the Modem’s Universal Plug and Play |
| features. |
|
|
DDNS | Configures the Dynamic DNS function. |
|
|
Tools | Contains options to back up and restore the |
| current configuration, restore all configuration |
| settings to the factory defaults, update system |
| firmware, or reset the system. |
|
|
Status | Provides WAN connection type and status, |
| firmware and hardware version numbers, system |
| IP settings, as well as DHCP, NAT, and firewall |
| information. |
|
|
Manually Configuring your Modem
System Settings
Time Settings
Set the time zone and time server for the Modem. This information is used for log entries and client access control.
Check “Enable Automatic
Time Server Maintenance” to automatically maintain the Modem’s system time by synchronizing with a public time server over the Internet. Then configure
two different time servers by selecting the options in the Primary Server and Secondary Server fields.
Password Settings
Use this page to restrict access based on a password. By default, the password is “admin”.
Passwords can contain from 3 to12 alphanumeric characters which are case sensitive.
Note: If your password is lost, or you cannot gain access to the user interface, press the reset button on the rear panel (holding it down for at
least 10 seconds) to restore the factory defaults. (By default the password is “admin” password.)
Enter a maximum Idle Time Out (in minutes) to define a maximum period of time an inactive login session will be maintained. If the connection is inactive for longer than the maximum idle time, it will be logged out, and you will have to login to the web management system again. (Default: 10 minutes)
1
2
3
4
5
6
7
section
20 | 21 |
