Manually Configuring your Modem
NAT Mapping Table
NAT Mapping Table displays the current NAPT (Network Address Port Translation) address mappings. The NAT address mappings are listed 20 lines per page, click the control buttons to move forwards and backwards. As the NAT mapping is dynamic, a Refresh button is provided to refresh the NAT Mapping Table with the most
The content of the NAT Mapping Table is described as follows:
•Protocol - protocol of the flow.
•Local IP - local (LAN) host’s IP address for the flow.
•Local Port - local (LAN) host’s port number for the flow.
•Pseudo IP - translated IP address for the flow.
•Pseudo Port - translated port number for the flow.
•Peer IP - remote (WAN) host’s IP address for the flow.
•Peer Port - remote (WAN) host’s port number for the flow.
Route
These pages define routing related parameters, including static routes and Routing Information Protocol (RIP) parameters.
Static Route Parameters
Static routing is the manual method used to set up routing. A network administrator enters routes into the Modem using the following screens. This method has the advantage of being predictable, and simple to set up. It is easy to manage in small networks but does not scale well.
Manually Configuring your Modem
Parameter | Description |
|
|
Index | Displays the number of the route. |
|
|
Network | Displays the IP address of the remote computer |
Address | for which to set a static route. |
|
|
Subnet Mask | Displays the subnet mask of the remote network |
| for which to set a static route. |
|
|
Gateway | Displays the WAN IP address of the gateway to |
| the remote network. |
|
|
Configure | Allows you to modify or delete configuration |
| settings |
|
|
1
2
3
4
5
6
7
section
32 | 33 |
