Wolfgang Puck BDRCRB007 Removing the Detachable Lid, Attaching the Detachable Lid

HSN7C_RiceCooker08 8/13/08 3:30 PM Page 9

Removing the Detachable Lid

1		To remove the Detachable Lid, first
		remove the Condensation Collector
		located under the Lid hinge by pulling
		it away from the Rice Cooker Housing.
		See Figure 1.
	2	Remove the Detachable Lid by pushing
		the Detachable Lid Stem in while lifting
		the lid straight up. See Figures 2 and 3.
	3	Do not attempt to remove the
Figure 1		Inner Lid or silicone gasket. See
		Figure 5. Do not place the Removable
		Lid in the dishwasher. Simply wash
		the Inner Lid with warm soapy water
		and rinse thoroughly.
	4	If needed, the Condensation Valve can
		be removed in order to rinse the steam
		vent. To remove the inner condensation
		valve, turn it counter-clockwise and lift
		straight up. See Figure 3.

Attaching the Detachable Lid

	1	To attach the Detachable Lid, slide the
		Lid Stem into the Lid Stem Receptacle
		on the Rice Cooker Housing. Push
		straight down until the Lid clicks in
		place.
		CAUTION: Ensure that your Lid Stem is
		locked in place by attempting to
		remove it by pulling straight up. A
Figure 1		Serious burn injury can occur if you try
		to move your Rice Cooker without the
		Lid locked into place.
		Replace the Condensation Collector by
	2
		pressing straight in over the Lid Stem
		until snaps into place.

Figure 2

Figure 2

Figure 3

2

1

Figure 4 Figure 5

Inner Lid

Silicone Gasket

9 10