WIRING
Note: This range hood must be properly grounded.The unit eheumd be installed by a qualified electrician in accordance with aH applicable nationam and local electricam codes.
GROUNDING iNSTRUCTiONS
This appliance must be grounded, in the event of an electrical short circuit, grounding reduces the risk of ebctric shock by providing an escape wire for the electric current. This appliance is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded.
WARNING - improper grounding can result in a risk of electric shock.
Consult a qualified electrician if the grounding instructions are not completely understood, or if doubt exists as to whether the appliance is properly grounded. Do not use an extension cord. if the power supply cord is too short, have a qualified electrician install an outlet near the appliance.
Set the electrical power supply within the space covered by the decorative flues.
Position the power socket at a maximum distance of
Fit the plug into the power socket.
CONNECT DUCTWORK
Adjust the width of the flue mounting bracket using screws (A) indicated in Figure.
Use screws (B) and wall anchors to secure flue mounting bracket to the ceiling as shown.
FLUE _,_OUNT_NG |
|
BRACKElr | SCREWS B |
| SCREWS A |