Control Pad Features, For a silent control panel

Control Pad Features

Note: The appearance of your oven control may differ slightly from the one illustrated below. However, all functions are the same. Also, pads may be shaped differently than those appearing in this Use and Care Guide.

READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar with the various functions of the oven as described below.

OVEN iNTERIOR

BAKE PAD

BROIL

PAD

COOK

TIME

UP and DOWN ARROWS

PADS Used

Oven

Cook

Time Pad

LIGHT PAD Used

Used to

PAD

Used to

along with the

function

pads

to select

oven

Light

(some

models)

to turn oven

select the

select

the

enter

the length

temperature,

cook time,

start

time (when

Pad

interiorlight ON

bake

variable

broil

of the

baking

programming

automatic

start time),

time/

Bake

Broil

and OFF. _

function.

function,

time.

of day, clean

time

and

minute

timer.

Pad

WARM & \

HOLD PAD \

Usedto set

theWarm& t V)

Hold _'_.CJ"

feature.	®
SELECT SEkF		0 i1
CLEAN PAD

	Usedto select	DELAY START PAD Used to
	the Self-Cleaning
		set the desired start time for
	cycle. A 2, 3 or 4
		baking or cleaning. May be
	hour Self-Clean
		used with COOK TIME to
	time may be
		program a delayed bake cycle.
	selected.

STOP CLEAR PAD Used to clear any function previously entered except the time of day and minute timer. Press STOP CLEAR to stop cooking. Also the STOP CLEAR pad is used to activate oven lockout setting.

CLOCK			Select	Clean'Pad			Stop

			(some	models)	Warm	&	Clear
SET PAD
	ADD	1 MINUTE PAD Used		to add 1			Pad
					Hold	Pad
Usedto set
	minute	to the Timer	Countdown. This
					(some
the time of	feature works with the Kitchen Timer only						Delay	Start
					models)
day.
	and does not affect		any cook	time or start			Pad	(some

time functions (some models).	models)

TIMER SET/OFF PAD Used to set or cancel the minute timer. The minute

timer does not start or stop cooking. Also, TIMER SET/OFF Pad is used to set the Continuous Bake Feature.

For a silent control panel:

The Ds_"_pad controls the Silent Control Panel feature. The Silent Control Panel feature allows the oven control to be

operated without sounds or beeps whenever necessary. If desired the control can be programmed for silent operation and later returned to operating with all the normal sounds and beeps.

To change control from normal sound operation to silent control operation

1.Press and hold _ pad for 6 seconds. A beep will sound, "....-- == will appear, "UPPER" and "DELAY" will flash in the display. After 6 seconds, a beep will sound and "SP" (speaker) will appear in the display.

2.Press/_ or v pad to switch between normal sound operation and silent operation mode. If "SP" appears, the control will operate with normal sounds and beeps. If % =" appears, the control is in the silent operation mode.

3.Wait 5 seconds to accept the change or press _ pad to reject the change.

Temperature Conversion (Fahrenheit / Celsius)

The _I pad controls the Fahrenheit or Celsius temperature display modes. The oven control can be programmed to display

temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to display in Fahrenheit. Note: both ovens will be changed at the same time.

To change display from Fahrenheit to Celsius or Celsius to Fahrenheit

Press

) pad and hold for 6 seconds. A beep will sound, "==="will appear "UPPER" and "BROIL" will flash in the display.

After 6 seconds a beep will be heard and "F" or "C" will appear in the display. If "F" appears, the display is set to show temperatures in Fahrenheit. If "C" appears, the display is set to show temperatures in Celsius.

Press A or v pad to switch between Fahrenheit or Celsius display modes. The display will show either "F" or "C".

3. Wait 5 seconds to accept the change or press _ pad to reject the change.