Kenmore 790.4281, 790.4282 manual Setting Surface Controls

Page 7

Setting Surface Controls

General Cooktop information

About the Ceramic Glass Cooktop

The ceramic cooktop has radiant surface elements located below the surface of the glass. The design of

the ceramic cooktop outlines the area of the surface element underneath. Make sure the diameter of the

pan matches the diameter of the element outline on the cooktop.

Heat is transferred up through the surface of the cooktop to the cookware. Only fiat-bottom cookware should be used. The type and size of cookware, the

number of surface elements in use and their settings, are all factors that will affect the amount of heat that will

spread to areas beyond the surface elements. The areas surrounding the elements may become hot enough to cause burns.

About the Radiant Surface Elements

The element temperature rises gradually and evenly. As the temperature rises, the element will glow red. To maintain the selected setting, the element will cycle on and off. The heating element retains enough heat to provide a uniform and consistent heat during the off cycle. For energy efficient cooking, turn off the element several minutes before cooking is complete. This will allow residual heat to complete the cooking process.

Locations of the Radiant Surface Elements and Controls

Your cooktop is equipped with radiant surface burners with different wattage ratings. The ability to heat food quicker and in larger volumes increases as the element wattage increases.

The radiant surface elements are located on the 30" cooktop as follows (See Figure 1):

One small 6 inch radiant element located at the right rear position.

One dual 12 inch radiant element located at the right front position.

Two 7 inch radiant elements located at both the left front and rear positions.

One mid-position radiant element located between left front and rear elements. Connects with front element to form Bridge element.

The radiant surface elements are located on the 36" cooktop as follows (See Figure 2):

One small 6 inch radiant element located at the right rear position.

One dual 12 inch radiant element located at the right front position.

One 7 inch radiant element located at the center rear position.

Two 7 inch radiant elements located at both the left front and rear position.

One mid-position radiant element located between left front and rear elements. Connects with front element to form Bridge element.

30" Cooktop - Location of the

Radiant Surface Elements and Controls

Figure 1

36" Cooktop - Location of the

Radiant Surface Elements and Controls

Figure 2

NOTE: Please read detailed instructions for ceramic glass cooktop cleaning in the General Care & Cleaning section and Before You Call checklist section of this Use and Care Guide.

NOTE: Radiant elements have a limiter that allows the element to cycle on and off to maintain consistent heat even at the Hi setting. This helps to prevent damage to the ceramic cooktop. Cycling is normal and will occur even more often if the cookware is too small for the radiant element or if the cookware bottom is not flat (For information concerning cookware, refer to Use Proper Cookware on page 6 of this Use and Care Guide)

NOTE: (White glass cooktops only). Due to the high intensity of heat generated by the surface elements, the glass surface will turn green when the element is turned off. This phenomenon is normal and the glass will come

back to its original white color after it has completely cooled down.

Image 7
Contents Parrilla Cocinar Lectrica Contents Save these instructions for future reference Read all instructions before using this applianceProduct Record Serial Plate LocationReadthese iNSTRUCTiONS Carefully Before Using the Cooktop Cooktop FeaturesSurface Cooking Using the GriddleINCORRECT General Cooktop information About the Ceramic Glass Cooktop Setting Surface ControlsUsing the Touch Control Setting Surface Controls contdControls Contd Available Esec Window Display SettingsRecommended To Operate the Single Radiant Surface Elements Operating Single Radiant Surface ElementsOuter Operating the Bridge Surface Element Warm & Hold FeatureTo Operate the Bridge Surface Element Controls SettingSabbath Feature Mode MinuteTimerNever store any cookware on the cooktop General Care & CleaningCleaning Recommendations for the Ceramic Glass Cooktop Operate Before You CallAcuerdos maestros de protecci6n Master Protection AgreementsCanada Your HomeMY-HOME Our Home

790.4281, 790.4282 specifications

The Kenmore 790.4282 and 790.4281 are standout models in Kenmore's range of gas ranges, designed for those who seek reliability and efficiency in their cooking experiences. Renowned for their blend of advanced features and practical design, these ranges deliver both quality and convenience for home chefs.

One of the significant characteristics of the Kenmore 790 series is its spacious oven capacity. Both models boast a generous oven size, allowing home cooks to tackle large meals effortlessly. Whether you are roasting a turkey or baking multiple trays of cookies, the ample space ensures that you can cook for gatherings without feeling constrained.

The models feature a powerful gas cooktop equipped with multiple burners, each designed to cater to various cooking needs. With high BTU power burners, rapid boiling, searing meats, and sautéing vegetables become quicker and more efficient. Additionally, the range includes simmer burners for delicate sauces and perfecting custards, making these units versatile for diverse culinary tasks.

In terms of technology, the Kenmore 790.4282 and 790.4281 integrate an electronic ignition system that eliminates the need for matches or lighters, enhancing safety while also reducing energy consumption. This technology ensures that the burners ignite quickly and reliably, providing immediate heat as needed.

Both models come with a self-cleaning oven feature, simplifying maintenance. This function uses high temperatures to burn off food residues, allowing for easy cleanup without harsh chemicals. Furthermore, the ranges are equipped with various cooking modes, including bake, broil, and convection, enabling users to choose the optimal method for their recipes.

The control panel is user-friendly, featuring intuitive knobs and a digital display. This design facilitates effortless adjustments to temperature and cooking times, catering to chefs of all skill levels. Additionally, the bright interior oven light allows for easy monitoring without the need to open the door, which can save energy and maintain consistent temperatures.

Another notable feature is the stainless steel finish, which not only provides a modern, sophisticated look but also enhances durability and ease of cleaning. This finish helps the range resist fingerprints and smudges, keeping it looking pristine.

In conclusion, the Kenmore 790.4282 and 790.4281 are exemplary gas ranges that combine innovative technology with practical features, catering to the needs of every home cook. Their spacious ovens, versatile cooktops, user-friendly controls, and self-cleaning capabilities make them a valuable addition to any kitchen, blending functionality with style.