Open Burner Models somemodels | Kenmore 3241, 790.324 specification

General Care & Cleaning

Open Burner Models (somemodels)

To Raise and Lower the Top for Cleaning

The cooktop is hinged and can be raised to clean the area underneath. Be sure all cooktop controls are turned to OFF and burner grates are cool.

1.Remove control knobs, burner grates and spillover bowls. Set aside.

2.Grasp the front of the cooktop and lift. Some models have a swing-up rod to support the cooktop in its raised position.

3.Clean under the cooktop.

4.Lower the top gently after lowering the support rod (some models).

5.Replace bowls, grates and control knobs.

When lowering the top, grasp the sides with fingertips only. Be careful not to pinch fingers. Also, DO NOT drop or bend the cooktop when raising or lowering. This could damage the surface.

DO NOT turn on the burners when the cooktop is raised for cleaning. Be sure that the top is completely lowered and securely in place before turning on the burners.

To Remove and Replace Burners

The burners on your cooktop maybe removed for cleaning. Be sure all controls are turned to OFF and burner grates are cool before removing cooktop burner units.

To Remove Burner Assemblies

1.Remove the shipping screw from the support brackets. See illustrations for location of screws.

2.Grasp the burner head and tilt it slightly (A in Figure 1) to the right to release the tab from the burner support.

3.Lift up the support bracket (see Figure 2) slightly and pull it away from the front of the cooktop to free the air shutter from the gas valve orifice (B in Figure 1).

Check the lighter and burner ports (Figure 2). If they are clogged, use a wire or needle to clear them.

To remove burned-on food, soak the burners in a vinegar and water solution for 20-30 minutes. For stubborn stains, scrub with soap and water or a mild abrasive cleanser and a damp cloth. Do not wash burners in a dishwasher.

To Replace Burner Assemblies

1.Slide the air shutter over the gas valve orifice (Figure 1).

2.Lower the burner assembly and hook the tab in the slot in the burner support. Make sure the burner assembly is properly seated and level.

3.Be sure both tabs are in the correct slots, the burner sits level and straight, and the flash tube forms a straight line from the igniter to the burner (Figure 2).

4.Replace shipping screws if desired. These screws are not necessary for the operation of the burner. They stabilize the burner during shipping of the appliance.

Retain the screws for later use in the event the range is moved.

Burner

Support

Tab

Shipping

Screw

Lig

Support

Brackets

Figure 1

Gas Valve

Orifice

Air Shutter

Figure 2

Ports Shipping

Screws

Flash Tube

Burner Support

Pilot or Igniter

790.324, 3241 specifications

The Kenmore 3241,790.324 is a feature-rich washing machine renowned for its efficiency and user-friendly design, making it a top choice for households seeking reliability and performance. This model integrates advanced technologies that enhance not only cleaning capabilities but also ease of use, making laundry days less of a chore.

One of the standout features of the Kenmore 3241 is its high-efficiency design, which promises to save both water and energy. The machine is equipped with a load sensing technology that adjusts water levels based on the size and weight of the load. This ensures optimal water usage, preventing unnecessary wastage and contributing to lower utility bills.

Additionally, the Kenmore 3241 comes with multiple wash cycles and options tailored to different fabric types and soil levels. From delicate garments to heavily soiled work clothes, users can select the appropriate cycle to achieve the best clean without damaging their laundry. The allergen cycle is particularly noteworthy, as it targets stubborn allergens, making it an excellent choice for allergy sufferers and families with sensitive skin.

Another impressive technology in this model is the direct drive motor, which provides powerful wash action while minimizing noise and vibration. This feature makes the Kenmore 3241 ideal for placement in apartments or close quarters where noise can be an issue. Moreover, the durable construction of the washing drum ensures a long lifespan with less wear and tear.

The control panel of the Kenmore 3241 is user-friendly, featuring a digital display that allows for easy navigation through settings and options. The intuitive interface is complemented by a delay start feature, allowing users to program the machine to start at a convenient time.

In terms of energy efficiency, the Kenmore 3241 holds an excellent Energy Star rating, signifying its commitment to sustainability. This model not only contributes to environmentally friendly practices but also helps users save money on their energy bills.

Overall, the Kenmore 3241,790.324 exemplifies modern laundry technology with its efficient performance, versatile wash options, and thoughtful design. It is an excellent investment for anyone looking to streamline their laundry process while being kind to the planet. Whether dealing with everyday laundry or special items, this washing machine delivers quality results that satisfy both performance and convenience.