Kenmore DU890DWG, DU910PFG, DU920PFG, GU960SCG, DU850DWG, DP840DWG, DU805DWG Cycle Timing Chart Notes

Page 45

CYCLE TIMING CHART NOTES

Note 1: Pre-Wash Sense Interval

Pressure switch contact closure at any time during this interval causes the cycle to jump to interval 37. Immediately. For the normal cycle, the heater is “off” during this interval. For the heavy and pots-n-pans cycles the heater is “on” during this interval. The power scour option changes this interval to a 16 minute heated wash interval for all 3 cycles (normal, heavy and pots-n-pans). If the water temperature reaches 140ºF or the thermostat closes. The heater is turned “off”. Time continues to elapse and all other output states remain the same until the prescribed interval time has elapsed.

Note 2: Pre-Wash Thermal Hold

This thermal hold is only executed during the heavy and pots-n-pans cycles. The thermal hold setpoint is 140ºF or thermostat contact closure and the de- fault time is 25 minutes.

Pressure switch contact closure at any time during this interval causes the cycle to jump to interval 37. Immediately.

Note 3: Pre-Rinse Sense Interval

Pressure switch contact closure at any time during this interval causes the cycle to jump to interval 31. Immediately. For the normal cycle, the heater is “off” during this interval. For the heavy and pots-n-pans cycles the heater is “on” during this interval. The power scour option changes this interval to a heated wash interval for the normal cycle. If the water temperature reaches 140ºF or the thermostat closes. The heater is turned “off”. Time continues to elapse and all output states remain the same until the prescribed interval time has elapsed.

Note 4: Pre-Rinse Thermal Hold

This thermal hold is only executed during the heavy and pots-n-pans cycles and only occurs if the pressure switch trips during the sense or thermal hold intervals of the pre-wash the thermal hold setpoint is 140ºF or thermostat con- tact closure and the default time is 20 minutes. Pressure switch contact clo- sure at any time during this interval causes the cycle to jump to interval 31. Immediately.

Note 5: Main Wash Thermal Hold

This thermal hold is automatic for the pots-n-pans and heavy cycles (set point

=140ºF). For the normal cycle. This thermal hold is invoked by selecting the power scour or high temp wash options (Set Point = 140ºF) or as a result of the pressure switch tripping during the pre-wash (Set Point = 130ºF). For the low energy wash and quick wash cycles. This thermal hold is invoked by se- lecting the high temp wash option (Set Point = 140ºF). In all cases, the default time for this thermal hold is 20 minutes

Note 6: Main Wash Recirculation Interval

The power scour option increases the length of this interval to 10:00 for the pots-n-pans and heavy cycles.

Note 7: Final Rinse Thermal Hold

This thermal hold is automatic for all cycles except the china wash and rinse only cycles (Set Point = 140ºF). For the china wash cycle, this thermal hold only occurs if the pressure switch trips during the pre-rinse (Set Point = 130ºF). In all cases the default time is 25 minutes.

If the sani rinse option is selected, then the set point for this thermal hold becomes 150ºF and the default time changes is 25 minutes.

Note 8: Air Dry

The default status for the dry period is heat dry “on”. Selecting the “air dry” option causes the heater to be turned “off” during this interval.

Note 9: China Dry Interval

When the china wash cycle is selected, the heater will be turned off during this interval.

Note 10: Option LED’s

When a valid option is active, then the LED for the option will be “on”.

Note 11: Sani Complete LED

When the “sani rinse” option has been selected and completed. A “sani com- plete” indicator is illuminated at the end of the cycle. During a cycle in which

“sani rinse” has been selected, the target thermal hold temperature for the “sani rinse” option must be satisfied and maintained. If this condition is not satisfied (because the final rinse thermal hold default time elapsed or power to the dishwasher was lost at any time during the remainder of the cycle that follows due to a door opening or AC line failure) then the sani complete indica- tor will flash on and off at the end of the cycle. Opening the door or pressing any key will turn the indicator off in either case.

Note 12: Motor Drain Phase Winding

This output is only “on” when the motor is starting in the wash mode. When the control has determined that the motor has started, the wash phase wind- ing will be turned “off”.

Note 13: Motor Drain Phase Winding

This output is only “on” when the motor is starting in the drain mode. When the control has determined that the motor has started. The drain phase winding will be turned “off”.

Note 14: Diagnostic Sensor Input Test

The soil sense pressure switch input is active during this interval. Pressure switch contact closure at any time during this interval causes the cycle to jump to the next interval. Immediately.

Note 15: Diagnostic Thermal Hold

The default status for this thermal hold is “on”. The thermal hold set point is 140ºF or thermostat contact closure and the default time is 60 minutes. After 60 minutes, the thermal hold is terminated and normal cycle timing resumes. The diagnostic test cycle advance function can also be used to terminate this thermal hold.

Note 16: Cycle Complete

A clean indicator will be on at the end of this cycle. Opening the door or pressing any key will turn the indicator off.

Note 17: Diagnostics Cycle -- Thermostat/Thermistor Indicator

The “clean” LED will turn on during the display test at the beginning of the cycle (interval 11) and again at the conclusion of the cycle (interval 2) regard- less of what it detects on the thermistor input. The “clean” LED will be on in intervals 1 through 8 of the cycle whenever an “open” (resistance greater than 200K OHMS. +/- 50K OHMS) is detected on the thermistor input by the control. Consequently, if a normally open operating thermostat were to be installed on the thermistor input, the “clean” LED would be on throughout the cycle until the thermostat tripped (e.g., during the thermal hold); With a ther- mistor installed, the clean LED would only be on in intervals 10 and 0. Be- cause the thermistor always has a resistance of between 50 K-OHMS and 8 K-OHMS under normal operating conditions.

Options Water Heat:

Forces a thermal hold to occur in the main wash regardless of soil level. The set point for this thermal hold is 140ºF. This option is automatic with the pots- n-pans and heavy cycles. It is not available on china wash or rinse only cycles.

Sani Rinse:

Raises the setpoint temperature of the thermal hold in the final rinse to ap- proximately 65ºC/150ºF. This option is not available with china wash, quick wash & rinse only cycles. This option is only possible on models that use a thermistor.

Air Dry:

Opens the circuit to the heater element during the dry period of the cycle. This option is not available on quick wash or rinse only cycles (which have no dry period).

Power Scour:

Inserts additional heated wash time into the pots-n-pans, heavy and normal cycle pre-wash sequence (interval 39 becomes a 16 minute, thermostatically controlled, heated wash). Turns the heater on in interval 33 of the normal cycle pre-rinse, invokes a thermal hold in the main wash of the normal cycle and extends interval 23 to 10 minutes in the pots-n-pans and heavy cycles. This option is not available on low energy, china wash, quick wash or rinse only cycles.

41

Page 44 Page 46
Image 45
Page 44 Page 46
Contents Dishwashers Goals and Objectives IntroductionTableofcontents Page DU800DWG, DU801DWG, DU805 Theory of OperationSoil Settler Special FeatureElectrical Shock Hazard Component AccessRemoving the Pump and Motor Assembly Removing the Spray Arm AssemblyServicing the Pump Assembly Removing the Heater Element Removing the Soil Settler AssemblyRemoving the Float Switch Removing the Water Inlet ValveRemoving the Thermal Fuse Accessing Components Inside the Door Removing the Check ValveRemoving the Motor Relay Removing the Timer Removing the Switch AssemblyRemoving the Door Latch Switches Dishwasher Dispenser Disassembly Page Dishwasher Dispenser Assembly Testing Procedure Results Solutions to Common ProblemsTimer Motor Troubleshooting Guide Technical Information Cycle Timing Chart Wiring Diagram Model DU810DWG Cycle Timing Chart Wiring Diagram Models DU840DWG, DP840DWG Cycle Timing Chart Wiring Diagram Model DU850DWG Cycle Timing Chart Wiring Diagram Model DU890DWG Cycle Timing Chart Page Model DU910PFG Models DP920PFG, DU920PFG Power Clean Filter Models With Tower Water FeedOperating Replacing the Heater Element Removing the Pump Motor AssemblyServicing the Operating Thermostat Removing the Inside Door Panel Removing Access and Outer Door PanelsReplacing the Spring Loaded Locking Tab Model DU910PFG Model DU910PFG Wiring Diagram Strip Circuits Harness Terminal Block Wire EndCycle Timing Charts Troubleshooting Guide Wiring Diagram Strip Circuits Cycle Timing Chart Cycle Timing Chart Notes Diagnostics and Sales Demo Timing Chart Model GU940SCG Model GU960SCG Model GU980SCG Power Clean Filter Models With Internal Water FeedSecuring Tab Servicing the Vertical Water TubeServicing the Soil Sensing System Servicing The Dishwasher Dispenser AssemblyDishwasher Dispenser Disassembly Page Dishwasher Dispenser Assembly Diagnostics and Sales Demo Timing Chart Troubleshooting Guide Model DU940SCG, DU960SCG, DU980SCG Strip Circuits Cycle Timing Chart Cycle Timing Chart Notes Installation Instructions Custom Panel Dimensions Removing Access and Door PanelsCustom Color Panels Installing Custom Panels Place the access panel front side down. Heavy Duty Door Spring Kit Installing Heavy Duty Door SpringsInstallation Instructions Installing the Floor Mounting KITPage

DU810DWG, DU800DWG, DU801DWG, DU840DWG, DU805DWG specifications

The Kenmore DU910PFG, DU890DWG, DU920PFG, GU960SCG, and DU850DWG are popular models of dishwashers that showcase a blend of advanced technology and practical features designed to enhance dishwashing efficiency. Each model brings unique characteristics to the table, making them suitable for a variety of kitchen needs.

The Kenmore DU910PFG stands out with its robust cleaning capabilities, thanks to its powerful motor and advanced spray arm technology. It is designed to handle heavily soiled dishes, ensuring that every item comes out sparkling clean. The model also features multiple wash cycles, allowing users to tailor their wash according to the load.

Next in line is the DU890DWG, which emphasizes energy efficiency alongside its remarkable cleaning power. This model is Energy Star certified, reducing water and electricity usage while still delivering high-performance results. The DU890DWG also boasts a quiet operation, making it an excellent choice for open-concept spaces where noise can be a concern.

The DU920PFG offers a streamlined design with an emphasis on user-friendly controls. Its intuitive interface allows for easy cycle selection, and the model is equipped with a delay start option, letting users set the washer to operate at a more convenient time. The stainless steel interior not only enhances the appearance but also aids in maintaining optimal temperature for better drying results.

Meanwhile, the GU960SCG is noted for its spacious interior and adjustable racks, making it easy to fit tall pots and pans. This model features a dual spray system, ensuring that all dishes receive even attention during washes. The increase in capacity is complemented by effective noise dampening technology, leading to a tranquil kitchen environment.

Lastly, the DU850DWG combines traditional features with modern enhancements. It offers a simple yet effective wash cycle with built-in options for quick cleans and heavy-duty washes. Its smart technology adapts the washing cycle to the load, ensuring that energy and water usage is optimized while maintaining powerful cleaning action.

In summary, the Kenmore DU910PFG, DU890DWG, DU920PFG, GU960SCG, and DU850DWG all exemplify the brand's commitment to quality and innovation in kitchen appliances. Each model is equipped with varying features and technologies to cater to the diverse needs of modern households, making them reliable choices for anyone in the market for a dishwasher.
Top Page Image Contents