Do not use, With this, Right Away Cycle

Use this rinse	cycle	for	Do not use
rinsing dishes,	glasses,		detergent
and silverware	that	will	with this

		not be washed		right	away.	cycle.
Soil	Wash	Rinse	Main	Rinse	Final	Dry	Time	Water
Level			Wash		Heated		(min}	Usage
Sensed					Rinse			(gal/L)
					Rinse			(gal/L)
		•		•			14	4,3/16.4
Heavy

NOTE: The sensor in your dishwasher monitors the soil level.

Cycle time and/or water usage can vary from the numbers above as the sensor adjusts the cycle for the best wash performance.

Anytime during a cycle, press

CANCEL/DRAIN glows. The dishwasher pauses for about 5 seconds and starts a 2 minute drain (if needed). Let the dishwasher drain completely. The light goes off when the dishwasher finishes the drain.

To stop the drain

You can press Cancel/Drain again to stop the drain immediately. Remember to drain the dishwasher before starting a new cycle. NOTE: A small amount of water remains in the dishwasher. This is normal.

To clear the indicators

Press Cancel/Drain before starting the dishwasher to clear all options and cycles.

During the first minute of a cycle

Pressa new cycleand/or options.

After the first minute of a cycle 1. Press

CANCEL/DRAIN glows. The dishwasher pauses for 5 seconds and starts a 2 minute drain (if needed). Let the dishwasher drain completely.

2.Check the detergent dispensers. If the main wash cup has

opened and the detergent washed away, refill the cups as needed.

3.Close the door.

4.Press a new cycle and/or options.

5.Press START.

You can add an item anytime before the main wash starts. Open the door and check the detergent dispenser. If the main wash section is still closed, you can add items.

To add items

1.Lift up the door latch to stop the cycle, Wait for the spraying action to stop before opening the door.

2.Open the door. If the main wash detergent dispenser is still closed, add the item.

3.Close the door, but do not latch it. Wait 30 seconds for the air in the dishwasher to warm up. This reduces the amount of moisture escaping from the vent when restarting a cycle.

4.Close the door firmly until it latches. The dishwasher resumes the cycle after about a 5 second pause.

You can customize	your	cycles by pressing	an option.	If you
change your mind,	press	the option again	to turn the	option off.
Select a different option		if desired.

You can change an option anytime before the selected option
begins. For example, you can press an unheated drying option
any time before drying begins.	_
Press START to use the same cycle and option(s) as the previous
wash cycle.
NOTE: If the last cycle you completed was a rinse cycle, when	__
you press Start, the dishwasher runs the last full wash cycle and
options.
Hi Temp Wash
Select this option to heat the water to 140°F (60°C) during parts
of the cycle. Heating the water helps improve washing results.
This option adds heat, water and wash time to parts of the cycle.
Hi Temp Wash is useful when loads contain baked-on food.

NOTE: Pots Pans automatically uses this option. Hi Temp Wash is an option with the Normal Wash, Water Miser and China Gentle cycles,

Air Dry

Select this energy-saving option to dry without heat. Air drying is useful when loads contain plastic dinnerware that may be sensitive to high temperatures.

LOCK ON

The dishes take longer to dry and some spotting can occur. For best drying, use a liquid rinse aid. Some items (such as plastics) may need towel drying.

NOTE: Quick Rinse automatically use this option. Air Dry is an option with all other cycles.

Do not use

with this

right

away.

cycle.

To stop the drain

To clear the indicators

Hi Temp Wash