
Canceling a Cycle
Anytime during a cycle, press
CANCEL/DRAIN glows. The dishwasher pauses for about 5 seconds and starts a 2 minute drain (if needed). Let the dishwasher drain completely. The light goes off when the dishwasher finishes the drain.
To stop the drain
You can press Cancel/Drain again to stop the drain immediately. Remember to drain the dishwasher before starting a new cycle. NOTE: A small amount of water remains in the dishwasher. This is normal.
To clear the indicators
Press Cancel/Drain before starting the dishwasher to clear all options and cycles.
During the first minute of a cycle
Press a new cycre and/or options.
After the first minute of a cycle
1.Press
CANCEL!DRAIN glows. The dishwasher pauses for 5 seconds and starts a 2 minute drain (if needed). Let the dishwasher drain completely.
2.Check the detergent dispensers. If the main wash cup has opened and the detergent washed away, refill the cups as needed.
3.Close the door,
4.Press a new cycle and/or options.
5.Press START.
Adding items D ring a CycJe
You can add an item anytime before the main wash starts. Open the door and check the detergent dispenser. If the main wash section is still closed, you can add items.
To add items
1.Lift up the door latch to stop the cycle. Wait for the spraying action to stop before opening the door.
2.Open the door, If the main wash detergent dispenser is still closed, add the item.
3.Close the door, but do not latch it. Wait 30 seconds for the air in the dishwasher to warm up. This reduces the amount of moisture escaping from the vent when restarting a cycle.
4.Close the door firmly until it latches. The dishwasher resumes the cycle after about a 5 second pause.
Option leciions
You can customize your cycles by pressing an option. If you change your mind, press the option again to turn the option off. Select a different option if desired.
You can change an option anytime before the selected option begins. For example, you can press an unheated drying option any time before drying begins.
Press START to use the same cycle and option(s) as the previous wash cycle.
NOTE: If the last cycle you completed was a rinse cycle, when you press Start, the dishwasher runs the last full wash cycre and options.
Hi Temp Wash
Select this option to heat the water to 140°F (60°C) during parts of the cycle. Heating the water helps improve washing results. This option adds both heat and wash time to parts of the cycle. Hi Temp Wash is useful when loads contain
NOTES:
•Pots Pans automatically uses this option. Hi Temp Wash is an
option with the Heavy Wash, Normal Wash and Light Wash cycles.
•Use this option for heavier than
Air Dry
Select this
LOCKON
The dishes take longer to dry and some spotting can occur. For best drying, use a liquid rinse aid. Some items (such as plastics) may need towel drying.
NOTE: Quick Rinse automatically use this option. Air Dry is an option with all other cycles.
Lock On
Use the Lock to prevent your dishwasher from accidentally being turned on. Use the Lock, also, to prevent accidental cycle or option changes during a cycle.
LOCKON
When LOCK ON is lit, all buttons are disabled.
NOTES:
•The dishwasher door can be opened while the controls are locked.
•You can turn on the Lock while the dishwasher is running.