CycleStatusIndicators
Follow the progress of your dishwasher with the Cycle Status Indicators. CLEAN glows when a cycle is finished.
The light turns off when you open the door or press Cancel/Drain.
I | I | III | III | II | I |
SENSING | WATERHEATING | WASHING | RINSE | DRY | CLEAN |
Sensing
Your dishwasher senses the soil level on the dishes. Soil level determines the length of some cycles, the amount of heat added to the wash or rinse, and the cycle needed for the load, SENSING glows during the soil sensing parts of the cycle. Wash action continues while sensing occurs.
Water Heating
WATER HEATING glows, and the cycle progression
pauses, whenever water is heated during a cycle. Wash or dnse action continues as the water heats.
Lock On
When LOCK ON is lit, all buttons are disabled.
I
LOCKON
You can turn on the Lock while the dishwasher is running. To lock or unlock the controls, see "Option Selections."
DryingSystem
During drying, you can see steam escaping through the vent at the upper left corner of the door. This is normal as the heat dries your dishes.
IMPORTANT: The vapor is hot. Do not touch the vent
during drying,
OverfillProtectionFloat
The overfill protection float (in the front right corner of the dishwasher tub) keeps the dishwasher from overfilling. It
must be in place for the dishwasher to operate,
x J
Check under the float for objects that may keep the protector from moving up or down.
17