Canceling a Cycle
1.Open the door slightly to stop the cycle. Wait for the spraying action to stop before opening the door to access the control panel.
2.Press CANCEL/DRAIN. The Cancel light glows.
3.Close the door. The dishwasher starts a
To stop the drain
You can press CANCEL/DRAIN again to stop the drain. Remember to drain the dishwasher before starting a new cycle.
To clear the indicators
Press CANCEL/DRAIN before starting the dishwasher to clear all options and cycles.
Changing a Cycle or Setting
During the first minute of a cycle
1.Open the door. The Start/Resume light begins flashing.
2.Press a new cycle and/or options.
3.Check the detergent dispensers. They must be filled properly for the new cycle.
4.Press START/RESUME and firmly close the door.
After the first minute of a cycle
1.Open the door slightly to stop the cycle. Wait for the spraying action to stop before opening the door to access the control panel.
2.Press CANCEL/DRAIN. The Cancel light glows.
3.Close the door. Your dishwasher starts a
NOTE: If your dishwasher does not need draining, the light turns off.
4.Open the door. Select a new cycle and/or options.
5.Check the detergent dispensers. They must be filled properly for the new cycle.
6.Press START/RESUME and firmly close the door.
NOTE: If the door is not closed within 3 seconds of pressing Start/Resume, press START/RESUME again.
Adding Items During a Cycle
You can add an item anytime before the main wash starts. Open the door and check the detergent dispenser. If the cover is still closed, you can add items.
To add items
1.Open the door slightly to stop the cycle. Wait for the spraying action to stop before opening the door. The Start light begins flashing.
2.Open the door. If the detergent dispenser cover is still closed, add the item.
3.Press START/RESUME and firmly close the door.
NOTE: If the door is not closed within 3 seconds of pressing Start/Resume, press START/RESUME again.
Option Selections
You can customize your cycles by pressing an option. If you change your mind, press the option again to turn the option off, or select a different option if desired.
You can change an option anytime before the selected option begins. For example, you can press an unheated drying option anytime before drying begins.
Press START/RESUME to use the same cycle and option(s) as the previous wash cycle.
NOTE: If the last cycle you completed was a rinse cycle, when you press START/RESUME, the dishwasher runs the last full wash cycle and options.
TURBOZONE™ wash option
Select this option to activate the TURBOZONE™ spray jets and provide intensified water spray to the back of the lower dishrack. The TURBOZONE™ wash option provides a concentrated wash action to pans, casseroles, etc. with tough food soil.
This option may add heat and wash time to the cycle.
NOTE: TURBOZONE™ is an option with the SMART WASH™, Pots Pans, and Normal Wash cycles.
IMPORTANT:
■Load pans, casserole dishes, etc. facing the TURBOZONE™ spray jets in the back of the lower dishrack. Tip items toward the rear of the dishrack to maximize coverage. Only one row of items may face the TURBOZONE™ spray jets. Stacking, overlapping, or nesting items will keep the TURBOZONE™ spray jets from reaching all of the surfaces.
■To maximize spray coverage, avoid placing silverware basket or other items to interfere with the rotation of the TURBOZONE™ spray jets.
■Turn the TURBOZONE™ wash option off if not loading items for this option. Always use the Heavy Soil detergent fill recommendation with TURBOZONE™ wash option. (See “How much detergent to use” in “Detergent Dispenser” section.)
Side view of TURBOZONE™ wash area
Hi Temp
Select this option to increase the water temperature during the wash portions of the cycle. Hi Temp wash raises the water temperature to 145ºF (63ºC), in the main wash. Heating the water helps improve washing results. Hi Temp wash is useful when loads contain tough food soil.
This option may add heat and wash time to the cycle.
NOTE: Hi Temp wash is an option with the SMART WASH™, Pots Pans, and Normal Wash cycles.
16