Kenmore 665.17425 manual No Heat Dry, Select this energy-saving option to dry without heat, No

Page 15

If your dishwasher has more than one wash cycle, you can change a cycle anytime during a cycle.

1.Lift the door latch to stop the cycle.

2.Turn the Cycle Control knob clockwise.

3.Check the detergent dispensers. They must be filled properly for the new cycle.

NOTE: Turning the Cycle Control knob can cause the covered Detergent Dispenser section to open and release the detergent. Check the covered section if the cycle uses detergent in both sections.

4.Close the door firmly until it latches. The dishwasher starts a new cycle.

The dishes take longer to dry and some spotting can occur. For best drying, use a liquid rinse aid. Some items (such as plastics) may need towel drying.

NOTE: No Heat Dry is an option with all cycles.

IMPORTANT:

Operate your dishwasher only when you are at home.

if your home is equipped with a water softener, do not start the dishwasher during the regeneration of the softener.

During drying, you can see steam escaping through the vent at the upper left corner of the door. This is normal as the heat dries your dishes.

You can add an item anytime before the main wash starts, or the Cycle Control knob reaches Light.

1.Lift up the door latch to stop the cycle. Wait for the spraying action to stop before opening the door.

2.Open the door and add the item.

3.Close the door, but do not latch it. Wait 30 seconds for the air in the dishwasher to warm up. This reduces the amount of moisture escaping from the vent when restarting a cycle.

4.Close the door firmly until it latches. The dishwasher resumes the cycle.

You can customize your cycles by pressing an option. If you change your mind, press the option again to turn the option off. Select a different option if desired.

You can change an option anytime before the selected option begins. For example, you can press an unheated drying option any time before drying begins.

Heat Dry

Select this option to ensure thorough drying of your dishes.

No Heat Dry

Select this energy-saving option to dry without heat, No

Heat drying is useful when loads contain plastic dinnerware that may be sensitive to high temperatures.

--,'.'.,-'-

i

IMPORTANT: The vapor is hot. Do not touch the vent during drying.

The overfill protection float (in the front right corner of the dishwasher tub) keeps the dishwasher from overfilling. It

must be in place for the dishwasher to operate.

Check under the float for objects that may keep the protector from moving up or down.

15

Image 15
Contents Dishwasher Lavavajillas Lave-vaisselle Table of Contents WE Service What WE SellFull ONE-YEAR Warranty on Kenmore Dishwashers WarrantyYour safety and the safety of others are very important Dishwasher SafetyGrounding Instructions Control Panel Parts and FeaturesSTART-UP Guide To clean the Soil Settler filter screenPreparing the faucet DishwasherThick washer Thin washer Screens Faucet adapter Quiet operating tips Loading Your DishwasherUtensil load How much detergent to use Using Your DishwasherWhere to fill Filling the dispenserChecking the dispenser To check water temperatureDo not DispenserHeat Dry No Heat DrySelect this energy-saving option to dry without heat, No Washing Special Items Material Dishwasher Safe?/CommentsYes Caring for Your Dishwasher TroubleshootingSpots and stains on dishes Dishes are not completely cleanDishes are not dry Dishes do not dry completelyDishes are damaged during a cycle Noises8004694663 Days a week3384515