Presonus Audio electronic Microphone Preamplifier user manual Front Panel Layout, Firestudio

CONTROLS AND CONNECTIONS

3.2 FRONT PANEL LAYOUT

FIRESTUDIO™ 10X10 FireWire Interface 8 XMAX Preamps 96kHz MIDI I/O S/PDIF I/O Digital Mixer

1	2	3	4	5	6	7	8
Mic	Instrument			Mic	Line

•Microphone Pre-Amplifier. Your FireStudio Project is equipped with eight custom designed PreSonus X-MAX microphone preamplifiers for use with all types of microphones including Dynamics, Condensers and Ribbons as well as instruments and line level signals. The award winning PreSonus preamplifier design is a Class A input buffer followed by a dual servo gain stage. This arrangement results in ultra low noise and wide gain control allowing the FireStudio Project user to boost desirable signal without increasing unwanted background noise.

1	2	3	4	5	6	7	8
48V	0dB	48V	0dB		48V	0dB	48V
	-6dB		-6dB			-6dB
1/ 2	-40dB	3/ 4	-40dB		5/ 6	-40dB	7/ 8

o48 Volt Phantom Power. The FireStudio Project has 48V Phantom power available in groups of two via push button switches on the front panel. From left to right, each button activates Phantom power for channels 1&2, 3&4, 5&6 and 7&8.

ƒXLR connector wiring for Phantom Power

•Pin 1 = GND

•Pin 2 = +48V

•Pin 3 = +48V

o+22dBu Headroom. The FireStudio Project microphone preamplifier has +22 dBu headroom. This feature gives you wide dynamic range and excellent transient response characteristics.

oNeutrik Combo Connectors. Each channel of the FireStudio Project has a Mic/Line connector using the Neutrik Combo connector. This revolutionary style connector lets you use either ¼” phone or XLR connectors in the same female input. The first two channels of the FireStudio Project are ¼” instrument and microphone XLR inputs. The line level inputs for these two channels are on the back panel of the FireStudio Project.

21 PreSonus 2007