Kenmore 41003, 41002, 41009 manual Temp Control

Temp Control

The temperature control allows you to set the freezer and the refrigerator temperatures. Use the following instructions to change and set these temperatures.

1.Press the Home button. The display screen will show the "Home" screen.

4.Touch the OK button(s) under the new temperature(s) to set and save the setting(s).

		Slide
		Show	7
			Cooli,,g,
		......J J •
		Ughting
		m
		Water		NOTES:
				The freezer or refrigerator temperature may change
				depending on the door opening/closing frequencies,
,	Touch the Temp Control button on the touch screen.			the food quantity, the ambient temperature, etc.
	NOTE: When ice cream is stored at a temperature			• Temperatures vary at each food storage section in the
				freezer and refrigerator compartments.
	above 4°F (-16°C)	in the freezer, it may melt.
				When power comes back after a short outage and the
				refrigerator temperature is lower than 42°F (6°C), the
				refrigerator and freezer will adjust to the last
				temperatures that were set. If the refrigerator
				temperature is higher than 42°F (6°C), it will revert
				back to the default temperatures of 38°F (3°C) and
				-2°F (-19°C) respectively.
				• Changing a temperature setting requires 3-4 hours for
				the stored food to reach the new temperature setting.
				• See page 28 for important icemaker operating
, Choose the desired		freezer and/or refrigerator		information.
	temperatures using the < and > buttons to the left and
	right of the currently set temperatures.

NOTE: The freezer temperature can be set between 8°F (-13°C) and -14°F (-26°C). The refrigerator temperature can be set between 46°F (8°C) and 34°F (1°C). The default freezer and refrigerator temperatures are -2°F (-19°C) and 38°F (3°C) respectively.

27