Drawers/Crispers (cont.)
To remove and replace a drawer cover:
Do not use excessive force when removing a drawer cover. Forced drawer covers can break and/or cause
personal injury.
,Remove all the drawers as described on page 41.
2.Slide the drawer cover out until the cover supports line up with the openings in the side supports as shown; then carefully remove the drawer cover from the refrigerator or freezer compartment.
,Using both hands, tilt the cover with the right side raised and position the left side on the desired shelf support. Lower the right side so the right cover support lines up with the opening in the side shelf support.
4.Slide the cover all the way in to lock it in position.
J
Ice Bucket (Freezer)
To remove and replace:
Do not force the ice bucket during removal. Unnecessary force could cause damage to the icemaker.
,Using both hands as shown, lift the ice bucket up while slowly pulling it out. Do not force the ice bucket during removal to prevent possible damage to the icemaker.
r
2.Replace the ice bucket by slightly tilting in the top of the ice bucket and sliding it into place.
f
43