Kenmore 790. 3017 manual Control Pad Features, For a silent control paneh

Control Pad Features

Note: The appearance of your oven control may differ slightly from the one illustrated below. However, a[[ functions

are the same, Also, push buttons or pads may be shaped differently than those appearing in this Use and Care Guide,

READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar with the various functions of the oven as described below.

OVEN

CLOCK

SET

COOKT[ME

UP and DOWN ARROWS PADS Used

INTERIOR

PAD Used to

PAD Used to

along

with the function

pads

to select

LIGHT PAD

set the time

enter

the length

oven

temperature,

cook

time,

start

time

Used

to turn

of day.

of the

baking

(when

programming

an automatic

start

oven

interior

light

"_

time.

\

time),

time of day, clean time and

%

minute timer.

ON and OFF__

_'\

\

X

\

T,OERSET,

Used

to set or cancel

_

_.

_.

the minute timer. The

\

\.

\

@

minutet merdoesno

t LtJ / t

startorstop

1

Also,

TIMER

SET/OFF

_,_.,/

_

Pad

is used

to set the

Continuous

Bake

@

@

Feature.

HAKEPAD--	FEATURE
Used to select	INDICATOR
the bake	LIGHTS--	These
function,	light to show		which
	feature is	in	use.
	/
	Z
			BROIL PAD--
4}			Used to select
			the variable broil
			function.

@

SELECT CLEAN

PAD (some models}

Used to select the

Self-Cleaning cycle. A 2, 3 or 4 hour Self- Clean time may be selected (some models).

DELAY START PAD Used to set the desired start time for baking. May be used with COOK TIME to program a delayed bake cycle or a delayed clean cycle.

Preheat
@ OveDeerLocke4	89

,PREHEAT & DOOR LOCK (some models) UGNTS* The "Oven" light will glow each time the oven unit turns on to maintain the set oven temperature. The "Preheat" light will glow when the oven is first set to operate, or if the desired temperature is reset higher than the actual oven temperature. The "Door Locked" light will flash until the door locks when the self-clean cycle is in use. It glows constantly after the door locks (some models).

WARM & HOLD PAD-- Used to set the Warm & Hold feature.

STOP CLEAR PAD-- Used to

clear any function previously

entered except the time of day ......:

and minute timer. Press STOP CLEAR to stop cooking. Also the STOP CLEAR pad is used to activate oven lockout setting. (some models).

*Note: The OVEN indicator light on the electronic display wi[[ turn ON and OFF when using the Bake feature and during preheat. This is normal and indicates that the oven is cycling to maintain the selected baking temperature. When preheat indicator light turns OFF, your oven is ready.

For a silent control paneh

When choosing a function, a beep wi[[ be heard each time a pad is pressed, If desired, the control can be programmed for silent operation.

1. To te[[ if your oven is set for normal or silent operation press and hold _ for 7 seconds, "- - "or "SP" (speaker)

2.Within 5 seconds, press the A or v pad to switch between normal sound operation and silent operation mode. The display wi[[ show either "- - " or "SP".

3.Wait 5 seconds to return to normal operating mode.

If "SP" appears, the control wi[[ operate with normal sounds and beeps. If "o o " appears, the control is in the silent operation mode.

Temperature Conversion (Fahrenheit / Celsius)

The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory, The oven can be programmed for any temperature from 170°F to 550°F (77°C to 288°C).

To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):

1.Press and hold , for 7 seconds until °F or °C appears in the display.

2.Press the A or v pad to change °F to °C or °C to °F.

3. Wait 5 seconds to accept the changes or press i to reject the changes.