
2)Hold the left and right side of the “Cover Assembly, dispenser” as shown in the picture, and pull and remove it. The cover dispenser is attached with a hook.
CAUTION : When replacing the dispenser cover in the reverse order of removal, be careful that the lead wire does not come out and the water tube is not pinched by the dispenser cover, as shown in the picture below.
3-12 SUB PWB FOR WORKING DISPENSER
1) Loosen the screw on the sub PWB.
2)Pull the sub PWB down.
3)Disconnect the wire harness and replace the sub PWB in the reverse order of removal.
3-10 DISPLAY PWB REPLACEMENT
1) Pull up and out on the dispenser cover to remove.
3-13 DUCT DOOR REPLACEMENT
1) Pull up and out on the dispenser cover to remove.
2) Disconnect the wire harness.
3) Remove the funnel
4) Replace in reverse order.
2) Follow the steps in the pictures
3-11 FUNNEL REPLACEMENT
1)Pull up and out on the dispenser cover to remove.
2)Disconnect the wire harness.
3)Replace in reverse order.
- 11 -