Kenmore 67178, 77171, 73871 manual Transferring the center hinge bracket, Transferring the top hinge

Reversing Door Swing (continued)

Transferring the center hinge bracket

Do not remove this screw

Center right

(a} Remove the hinge bracket from the center right side of the cabinet by removing the three outermost Torx screws_

(b)Remove the three outermost Torx screws from the center left side of the cabinet and screw them into the

holes at the right side uncovered in Step (a) above

1

/ Do not remove

_rew

Center left

(c)Place the center hinge bracket over the holes at the center left side of the cabinet, insert the screws you removed from the opposite side, and tighten them.

Transferring the top hinge

Interchange hinge and screws at top right with screws at top left of the cabinet. Do not tighten the screws on the hinge side at this time

Transferring	door handles
Freezer door
Plug button	._	4w
	L._.D.,	- _0"

(a)Remove screw holding handle to top of door.

(b)Remove three screws ho}ding handle to bottom of door_

(c)Transfer screw from handle hole in top right of door to opposite side,

(d)Transfer plug button in top left of door to opposite side_

{e) in reverse order, reassemble handle to right side of door using screws removed in Steps (a) and (b)

Fresh food door

i

I

I

I

Long Handle Short Handle

(a)Transfer two screws in bottom left of door to opposite side. (Wait until handle is moved before reinstalling front screw )

14