Kenmore 795.7977 manual Dispenser, Ultralce, Filter, Light / Light Sensor

Page 18

SETTING THE CONTROLS

Temperature

•The refrigerator control is preset at 37°F (3°C) and the freezer control is preset at 0°F (-18°C). These are the recommended temperature settings for normal use and conditions. Wait 24 hours for the refrigerator and freezer to reach these temperatures.

•The Refrigerator Temp Control range is from 33°F to 46°F (0°C to 8°0). The lower the number setting, the colder the refrigerator compartment will become.

•The Freezer Temp Control range is from -6°F to 8°F (-21°C to -13°C). When the setting is at a lower number, the freezer compartment becomes colder.

NOTE: When changing control settings, wait 24 hours before making additional adjustments. After 24 hours, adjust the compartments temperatures as desired.

Dispenser

•When you press the Water button, the Water icon will light up.

•When you press the Ice button, either the Cube or Crushed Ice icon will light up. Press the Cube/

Crushed button to switch between Cube and Crushed ice.

•There could be some dripping after dispensing water, Hold the glass below the dispenser after dispensing to catch any drops of water that may fall.

•, CAUTION: The control display is operated by touch. Excessive moisture on the display may cause a malfunction.

Please keep display clean and dry.

_, WARNING: If a door is open, the dispenser does not work.

Ultralce

•When you touch the Ultralce button, the graphic

[ _ ] will light up in the display and it continues for

24 hours. It will automatically shut off after 24 hours have passed.

Or you can stop this function manually by touching the button one more time.

•This function increases both icemaking and freezing capabilities.

Filter

•Filter Reset : When the FILTER RESET indicator light

turns on, you have to change the water filter. Press the FILTER RESET button for 3 seconds to turn the

indicator light off. You need to change the water filter approximately every 6 months.

Light / Light Sensor

•If the light is set "Auto" mode, dispenser light will automatically turn on and off according to the brightness of room detected by light sensor.

18

Image 18

Contents Mmtrio Line 32-34 Troubleshooting Guide 35-38 Kenmore Elite Limited Warranty Disclaimer of implied warranties limitation of remediesMaster Protection Agreements Basic Safety Precautions Before YOU Throw Away Your OLD Refrigerator Or Freezer To Connect ElectricityRecommended Grounding Method USE of Extension CordsFixed Door Bin Extra Ice Bin p Installation When Moving Your RefrigeratorUnpacking Your Refrigerator HOW to Remove Door Handles Removing Refrigerator HandleRemoving Freezer Drawer Handle HOW to Replace Door Handles Replacing Refrigerator Door HandleReplacing Freezer Drawer Handle Removing and Replacing Refrigerator Doors To remove the left refrigerator doorTo remove the right refrigerator door Reinstalling the Refrigerator Door Right Door Left DoorHOW to Remove and Reinstall Pullout Drawer Removing Pullout Drawer Top DrawerRemoving Pullout Drawer Bottom drawer Reinstalling Pullout Drawer Top Drawer Risk of Child EntrapmentReinstalling Pullout Drawer Bottom drawer Leveling and Door Alignment LevelingTo remove the base cover Filter DispenserUltralce Light / Light SensorPower Saving Mode AlarmTemperature Mode Switch FunctionF -C LockIN-DOOR ICE Bank Adjusting Control Settings Food Storage GuidePackaging Storing Frozen FoodWater Dispenser Packaging recommendationsRefrigerator Shelves Removing Humidity Controlled Crisper Temperature Controlled Pantry DrawerHumidity Controlled Crisper Modular Door BINAirflow Durabase Divider Extra ICE BINDurabase Do not block any of the cool air vents with foodFilter Remove the old cartridgeReplace with a new cartridge To reduce risk of property damage due to water leakage Outside General Cleaning TipsLight Bulb Replacement Door Liners and GasketsPower Interruptions When YOU GO on VacationWhen YOU Move Automatic Icemaker Personal Injury HazardWhen YOU should SET the Icemaker Normal Sounds YOU MAY HearPreparing for Vacation Shut OFF the Main Water Supply Before YOU BeginWhat YOU will Need Choose the Valve LocationConnect the Tubing to the Valve Fasten the Shutoff ValveTighten the Pipe Clamp Flush OUT the TubingPlug in the Refrigerator Connect the Tubing to the RefrigeratorTurn the Water on AT the Shutoff Valve Start the IcemakerLights do not Work Understanding Sounds YOU MAY HearRefrigerator does not Operate Check ifDoors will not Close Completely Vibration or Rattling NoiseCompressor Motor Seems to RUN TOO Much Check if ThenThere is Water in the Defrost Drain PAN Frost or ICE Crystals on Frozen FoodICE has OFF-TASTE or Odor Refrigerator Seems to Make TOO Much NoiseIs Interior Moisture Buildup Cubes Produced by Icemaker are TOO SmallDoors are Difficult to Open CheckifPage Anage