Kenmore 795.755494, 795.755424 Understanding Sounds YOU MAY Hear, Refrigerator does not Operate

Page 31

UNDERSTANDING SOUNDS YOU MAY HEAR

Your new refrigerator may make sounds that your old one didn't make. Because the sounds are new to you, you might be concerned about them. Most of the new sounds are normal. Hard surfaces, like the floor, walls and cabinets, can make the sounds seem louder than they actually are. The following describes the kinds of sounds and what may be making them.

•The defrost timer will click when the automatic defrost cycle begins and ends. The thermostat control (or refrigerator control, depending on the model) will also click when cycling on and off.

•Rattling noises may come from the flow of refrigerant, the water line, or items stored on top of the refrigerator.

•Your refrigerator is designed to run more efficiently to keep your food items at the desired temperature. The high efficiency compressor may cause your new refrigerator to run longer than your old one, and you may hear a pulsating or high-pitched sound.

You may hear the evaporator fan motor circulating the air through the refrigerator and freezer compartments.

•As each cycle ends, you may hear a gurgling sound due to the refrigerant flowing in your refrigerator.

•Contraction and expansion of the inside walls may cause a popping noise.

•Water dripping on the defrost heater during a defrost cycle may cause a sizzling sound.

You may hear air being forced over the condenser by the condenser fan.

•You may hear water running into the drain pan during the defrost cycle.

REFRIGERATOR DOES NOT OPERATE

Check if...

The power supply cord is unplugged.

A household fuse has blown or circuit breaker tripped.

The refrigerator control is set to the OFF position. Refrigerator is in the defrost cycle.

Then...

Firmly plug the cord into a live outlet with proper voltage.

Replace the fuse or reset the circuit breaker.

Refer to the Setting the Controls section on page 14.

Wait about 30 minutes for defrost cycle to end.

VIBRATION OR RATTLING NOISE

Check if...

The refrigerator is not resting solidly on the floor.

LIGHTS DO NOT WORK

Check if...

The power supply cord is unplugged. Light bulb is loose in the socket.

Light bulb has burned out.

Then...

Floor is weak or uneven or leveling legs need adjusting. See Installation section on page 7 and 13.

Then...

Firmly plug the cord into a live outlet with proper voltage.

Turn the refrigerator control to the OFF position and unplug the refrigerator. Gently remove the bulb and reinsert. Then plug in refrigerator and reset the refrigerator control.

Replace with an appliance bulb of the same wattage, size and shape available at your local hardware store. (See the Changing the Light Bulb(s) section on pages 24-25.) Turn the temperature control to the OFF position and unplug the refrigerator prior to replacement.

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Kenmore Bottom Mount Refrigerator Freezer Features Refrigerator FeaturesFor prices and additional information call U.S.A Master Protection AgreementsPage USE of Extension Cords To Connect ElectricityRecommended Grounding Method Before YOU Throw Away Your OLD Refrigerator Or FreezerLight p.24 OPull Next InstallationWhen Moving Your Refrigerator Unpacking Your RefrigeratorRemoving Freezer Drawer Handle HOW to Remove DOOR/DRAWER HandlesRemoving Refrigerator Handle Mounted on door Keyhole slots on back of handleScrews mounted on door On back of handle HOW to Replace DOOR/DRAWER HandlesReplacing Refrigerator Door Handle Screws mounted on door Replacing Freezer Drawer HandleRemoving Refrigerator Door Removing and Replacing Refrigerator DoorsCorrectIncorrect Replacing Refrigerator Door Right DoorRemoving Pullout Drawer HOW to Remove and Install the Pullout DrawerDoor Alignment Leveling and Door AlignmentLeveling To remove the base coverEnsuring Proper AIR Circulation Setting the ControlsFood Storage Guide Adjusting Control SettingsWater Dispenser Storing Frozen FoodPackaging recommendations Wine Holder 795.7555* Model Only Refrigerator ShelvesCrisper Suprafresh Crispers with TILT-OUT CompartmentControl To remove lattice Crisper Cover with Lattice on Inner SurfaceCrispers with rails To remove crisper To replace crisperTo replace Glide N Serve Glide N ServeModular Door BIN ControlsICE BIN Dairy BINEGG BOX Tilting DoorPull OUT Drawer TILT-OUT Door BasketDurabase Divider DurabaseReplace with a new cartridge Water FilterDoor Liners and Gaskets General Cleaning TipsLight Bulb Replacement OutsideWhen YOU GO on Vacation Power InterruptionsPreparing for Vacation When YOU should SET the Icemaker Power Switch to O OFFOperation Instructions Normal Soundsyou MAY HearBefore YOU Begin Power drillChoosethe Valvelocation Flush OUT the Tubing Fasten the Shutoff ValveTighten the Pipe Clamp Connect the Tubing to the ValveRefrigerator Connect the Tubing toStart the Icemaker Plug in the RefrigeratorLights do not Work Understanding Sounds YOU MAY HearRefrigerator does not Operate Vibration or Rattling NoiseCheck Then Compressor Motor Seems to RUN TOO MuchDoors will not Close Completely Frost or ICE Crystals on Frozen FoodCubes Produced by Icemaker are TOO Small ICE has OFF-TASTE or OdorThere is Water in the Defrost Drain PAN Refrigerator Seems to Make TOO Much NoiseCheck if Then

795.751994, 795.755434, 795.751964, 795.755464, 795.751934 specifications

The Kenmore 795 series refrigerators, including models 795.755424, 795.755494, 795.751944, 795.755444, and 795.751924, represent a modern approach to kitchen appliance design, emphasizing efficiency, practicality, and advanced technology. These refrigerators are ideal for families and individuals looking for reliability and storage space.

One of the defining features of these Kenmore refrigerators is their spacious capacity. With adjustable shelving and door bins, users can maximize storage for food and beverages. The adjustable shelves are perfect for accommodating larger items, while the door bins provide easy access to condiments and smaller goods. The flexible layout caters to diverse storage needs, enhancing organizational efficiency in the kitchen.

In terms of cooling technology, the 795 series incorporates a sophisticated Multi-Air Flow system that ensures consistent cooling throughout the refrigerator and freezer compartments. This system helps maintain optimal temperatures, reducing the risk of food spoilage and extending the freshness of perishable items. The presence of humidity-controlled crispers is another highlight, ensuring fruits and vegetables retain their texture and nutrients.

Energy efficiency is a significant consideration in today's appliance market. The Kenmore 795 models are designed with energy-efficient technology, helping users save on utility bills while minimizing their environmental impact. With ENERGY STAR certification, these refrigerators meet stringent guidelines for energy consumption, providing peace of mind for eco-conscious consumers.

The Kenmore 795 series also features advanced ice and water dispensers. These dispensers deliver fresh, filtered water and ice on demand, adding convenience for families. Users can easily fill bottles and pitchers without opening the refrigerator door, further enhancing energy efficiency.

In addition to practical features, these refrigerators are designed with a sleek and modern aesthetic. Available in various finishes, including stainless steel, they can seamlessly integrate into any kitchen decor. The user-friendly digital controls and LED lighting add to the appliance's appeal, ensuring a contemporary experience.

Overall, the Kenmore 795.755424, 795.755494, 795.751944, 795.755444, and 795.751924 models provide a blend of practicality, efficiency, and modern design. These refrigerators are an excellent choice for those seeking reliable appliances that cater to the demands of everyday life while enhancing the functionality of their kitchen.
Top Page Image Contents