Adjustable Filter Wrench
The adjustable filter wrench provided is intended to:
Help turn the valve handle to the “ON”, “OFF” or “BYPASS” positions.
Remove the sump for easy filter changes.
TURNING THE VALVE HANDLE
The “Push/Slide” button on the wrench will need to be pushed in and the slide moved up into the wrench ring (See Figure 17) to fit on the valve handle.
The valve handle turns clockwise from the “ON” posi- tion toward the “OFF” and “BYPASS” positions and, counterclockwise from the “BYPASS” position toward the “OFF” and “ON” positions (See Figure 18).
CAUTION: Forcing the valve handle beyond the “ON” or “BYPASS” positions will damage the valve (See Figure 16).
The valve has a pressure relief valve built in, so there will be a small amount of water coming out from under the top cap when the valve is being turned from position to position.
REMOVING THE SUMP
The slide will need to be pushed back into the wrench handle to clear the wrench ring (See Figure 19). Push in the “Push/Slide” button on the wrench, and push the slide back into the wrench handle.
IMPORTANT: Remember to turn the valve to “BYPASS” or “OFF” before removing the sump.
To remove the sump, turn it to the left (See Figure 14 on Page 11).
Move
Slide Up
Push/Slide
Button
Figure 17
Turn
Clockwise
toward “OFF” and “BYPASS”
Turn Counterclockwise toward “OFF” and “ON”
Figure 18
Move
Slide Down
Push/Slide
Valve TurningButton
Range
Figure 16 | Figure 19 |
Questions? Call The Kenmore Water Line
12