Sanyo ECJ-S35S, ECJ-S35K Check the current time, After selecting a MENU, press the Timer button

Page 11

HOW TO USE TIMER COOKING (Rice cooking completes at a specific time.)

1 Check the current time.

¥Set the timer after preparing the rice following steps (1)-(3)in the How to Cook Rice section.

¥Check the current time. If the clock has not been set to the correct time,

timer cooking may not work properly. (

page 8)

¥The timer cannot be set if the KEEP WARM lamp is lit or flashing. Press KEEP WARM/OFF button to turn off the lamp.

2 After selecting a MENU, press the TIMER button.

¥The TIMER lamp will begin flashing and the timer setting

will be shown on the DISPLAY PANEL.

¥ If the existing timer setting is correct, then proceed to the operation described in section 4.

¥page 9 for menu selection.

Clock time is correct.

Initial Setting:

When the timer is set for 6:00am.

3 Press the HRS and MIN buttons to set the time of completion.

¥Press HRS button to change the hour. The hours change in

1-hour increments. Press MIN button to change minutes. The minutes change in 10-minute increments.

¥The timer can be fast-forwarded by holding down the HRS or MIN buttons.

¥The time displayed for 12:00 noon is Ò0:00 PMÓ

Example: 12:00 noon

4 Press the COOK/START button.

¥The TIMER lamp will change from flashing to lit and the appointment time will be shown on the DISPLAY PANEL. This completes the timer setting.

¥The TIMER lamp will go off when cooking starts and the COOK lamp will light.

Lamp changes from flashing to lit.

￿Once the timer has been set, timer cooking can be performed in two steps.

¥Press TIMER button after reviewing the menu selection. Press COOK/START button after reviewing the time setting.

¥Previous timer settings are stored in memory.

AFTER TIMER COOKING STARTS

If you want to change the timer setting: Press the KEEP WARM/OFF button, and then reset the timer following steps

(2)-(4)described before.

If you want to check the current time:

The current time will be displayed while holding HRS and MIN buttons.

TIMER COOKING

¥Timer cooking should be set to begin within 12 hours. The rice may begin to deteriorate if the rice is left in the water for an extended time.

¥Do not use timer cooking to prepare mixed rice, bi bim bab or sweet rice that contains other ingredients. These ingredients or seasonings may deteriorate or settle to the bottom and fail to cook properly.

¥Rice may turn out soft when cooked using the timer.

SETTING TIMER Timer must be set for the minimum times listed below. Otherwise, cooking will start immediately.

Menu

White, Rinse-Free, Sprouted Brown

Brown Rice

Porridge

Quick Rice

Time Required

1 hour and 10 minutes

1 hour and 40 minutes

1 hour and 10 minutes

1 hour

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents
Rice Cooker Table of Contents Important Safeguards Precautions Allow to Cool off Wall Steam Vent & LID Release Names and Function of Parts3Press HRS and MIN to set the correct time HOW to SET the ClockPower Failure While the Unit is in Operation BUILT-IN Lithium BatteryAttach the Inner Lid and close the Outer Lid Plug in power supply cord and select MenuAccurately measure the rice, then wash it Press COOK/START button to cook HOW to Cook RicePress the COOK/START button After selecting a MENU, press the Timer buttonCheck the current time Press the HRS and MIN buttons to set the time of completionPress MIN buttons and select the time for it HOW to USE PRE-SOAKHOW to Cook DOL SOT BI BIM BAB Select Menu and press PRE-SOAK6Buzzer rings again and it finishes making bread Select the menu Bread4Buzzer rings and the fermentation finishes 5After buzzer rings again, let the stuff turn inside outMain Body and Outer LID Cleaning and MaintenanceSpecifications Heating Element and Temperature SensorSymptom Possible Cause Warranty Application
Top Page Image Contents