CONNECTING THE SPEAKER SYSTEM
Powering the Transmitter
Transmitter
120V AC wall outlet
AC Power
Adapter
Connect the small, round plug from the transmitter AC power adapter to the transmitter’s power input jack. Plug the other end of the transmitter AC power adapter into any standard 120V AC wall outlet.
Note: Be sure to use the AC power adapter rated 12V DC 100 mA.
Note: There is no transmitter ON/OFF switch. The transmitter is designed to be left plugged in and powered at all times. If you will not be using the AW880 for an extended period of time, unplug the transmitter AC power adapter.
Connecting to an Audio Source
Audio
Input Cable
Transmitter Audio source
Connecting to an MP3 player, CD player, or computer
Plug the cable coming out of the transmitter into the headphone output of your MP3 player or CD player (or the audio output jack on your computer).
Transmitter |
|
| A/V Receiver |
| Audio Output |
| “Y” adapter cable |
Audio Input Cable | (not included) |
|
Connecting to an A/V Receiver
1.Connect a “Y” adapter cable (not included) to the 3.5mm
2.Connect the left (white) and right (red) audio plugs on the ”Y” adapter cable to the corresponding left and right audio outputs of your A/V receiver, amp or other audio source.
Warning: This product is designed to work with line level outputs or headphone outputs only. DO NOT connect it directly to speaker outputs as it will permanently damage the transmitter.
4