Connect Tubes, HOW to CUT and Connect the Tubes

Step 3 - Connect Tubes

CONNECT TUBE TO WATER SUPPLY FITTING

1.Locate the remaining piece of 3/8” O.D. tubing. Refer to the “Connect Tubes” section, below, and insert one end of the tube all the way into the 3/8” quick connect fitting on the water IN side of the filter assembly. See Figure 8.

2.Run the other end to the water supply fitting on the cold water pipe. See Figure 8. Refer to the “Cut Tubes to Length” section, below, and cut the tube square and to length as needed.

3.Refer to the “Connect Tubes” section, below, and insert the tube all the way into the 3/8” quick connect fitting on included water supply fitting (installed in Step 1).

4.Pull on the tube at each end to be sure it is held firmly in both of the quick connect fittings.

HOW TO CUT AND CONNECT THE TUBES

Your Two-Stage Drinking Water Filter includes push-in fit- tings for quick tubing connection. Review the following instructions before connecting the tubes.

Cut tubes to length

1.Use a sharp cutter or knife to cut the end of tubing. Always cut the tubing square. See Figure 9.

2.Inspect the end (about 1") of the tubing to be sure there are no nicks, scratches or other rough spots. If needed, cut the tubing again.

Connect tubes

1.Push tubing through collet, until it engages the o-ring. See Figure 10. Continue pushing until the tube bottoms out against the back of the fitting. See Figure 11. A com- mon mistake is to stop pushing when the tube engages the o-ring. This will lead to future leaks. When a 3/8” tube is fully engaged, 3/4” of the tube has entered the fit- ting. See Figures 10 & 11.

2.If using tubing other than tubing supplied with the sys- tem, be sure it is of high quality, exact size and round- ness with a smooth surface.

Disconnect Tubes

1.Push the collet inward with a finger tip. See Figure 12.

2.Continue holding collet inward while pulling the tubing out. See Figure 13.

O-Ring Seal

SINK

tubing

cold water supply fitting water

cold water

shutoff filtration assembly

Figure 8

Push In Fitting

Tube

Cut tubing square with end of tubing round, smooth, with no cuts, nicks or flat spots.

Tube Correctly Cut

Figure 9

ColletO-Ring

Tube Partially Engaged With Fitting

Figure 10

ColletO-Ring

Tube Fully Engaged With Fitting

Figure 11

Collet (Depress to

Remove Tubing)

Collet

Fitting

Tubing

Collet and O-Ring

Figure 13

Disconnect Tubing

Figure 12

Questions? Call The Kenmore Water Line 1-800-426-9345 or visit KenmoreWater.com

625.38461 specifications

The Kenmore 625.38461 is a powerful and efficient vacuum cleaner designed to deliver exceptional cleaning performance for households. Packed with innovative features and modern technologies, this model stands out in the crowded vacuum market, making it a popular choice for homeowners looking to maintain cleanliness and hygiene.

One of the main features of the Kenmore 625.38461 is its powerful motor, engineered for robust suction capabilities. This allows the vacuum to effectively pick up dirt, dust, and debris from various surfaces, including carpets, hardwood floors, and upholstery. The powerful suction helps users achieve a thorough clean without the need for multiple passes.

Another standout characteristic is its multi-surface cleaning ability. The Kenmore 625.38461 comes equipped with adjustable height settings, enabling users to adapt the vacuum for different floor types swiftly. This flexibility ensures optimal cleaning performance, whether it’s a plush carpet or a hard floor.

The vacuum features a HEPA filtration system, which is particularly beneficial for allergy sufferers. This advanced filtration captures 99.97% of dust particles, allergens, and pet dander, effectively improving indoor air quality. Additionally, the dustbin is easy to empty and clean, promoting a hassle-free maintenance experience.

The design of the Kenmore 625.38461 emphasizes user convenience. It includes a variety of attachments, such as a crevice tool, dusting brush, and upholstery nozzle, enabling users to tackle various cleaning tasks with ease. The onboard storage for these tools also adds to the vacuum’s practicality, keeping everything organized and accessible.

Moreover, the lightweight and maneuverable design of the Kenmore 625.38461 makes it easy to navigate around furniture and tight spaces. The swivel steering feature enhances control, allowing users to reach every corner of their home without straining.

In conclusion, the Kenmore 625.38461 excels with its powerful suction, versatile cleaning capabilities, and advanced filtration system. With a user-friendly design and a comprehensive set of tools, it stands as an excellent choice for families seeking an efficient and reliable vacuum cleaner. The combination of technology and practicality makes it a standout option in the competitive landscape of household cleaning appliances.