Roadmaster VRA1.0 installation instructions What is the per channel RMS power of this amplifier?

What is the per channel RMS power of this amplifier?

150 Watts RMS into 4 Ohm @ <1.0% THD +/- 5%

Can I hook up two subwoofers to this amplifier?

Only if both subwoofers are wired in series.

What if my car radio doesn't have RCA line outputs?

You will need a converter used to change the signals from the speaker wires to RCA line level inputs. Follow the converter manufacturer's installation instructions.

What should I do if my car radio doesn't have a remote wire?

Connect the amplifier remote terminal to a switched 12 Volt circuit controlled by the ignition switch. This will turn the amplifier off when the ignition switch is turned off.

Do I need a stiffening capacitor with this amplifier?

It never hurts to have extra reserve power when operating an amplifier of this caliber.

The VRPC1000 Power Capacitor is the perfect companion to the VRA2.0 Amplifier.

Why does the Power / Protect LED switch between green & red?

Check your POWER and GROUND connections. Also check to see that your wire size is sufficient to carry the current demand. Check for improper impedance loads

Why does the Power / Protect LED stay red?

This typically indicates that one or more of the MOSFET output transistors has shorted.

This condition will not fix itself. The amplifier must be returned to Virtual Reality Sound Labs for repair.

Why don’t I have any sound when the protection light is green?

Check the controls on the stereo, make sure that the volume, balance, and fader controls are set properly. Also check or replace the RCA cables. They may be defective.

For Information and Technical Assistance,

Call Toll-Free in U.S.A. and Canada.

1-800-445-1797

PLEASE DO NOT RETURN PRODUCT TO STORE. visit us on the WEB

WWW.VR-3.COM

Limited Warranty

VIRTUAL REALITY SOUND LABSTM products are designed and manufactured to provide a high level of trouble-free performance. VIRTUAL REALITY SOUND LABSTM warrants, to the original purchaser, that its products are free from defects in material and workmanship for 30 days from the date of original purchase, as part of our commitment to product excellence. VIRTUAL REALITY SOUND LABSTM and/or it’s affiliates routinely improves the designs, materials or production methods of its existing products. Because it is impractical to publicize all changes in every product, we reserve the right to make such changes without notice.

CONDITIONS OF WARRANTY:

If during the 30 day warranty period your new product is found to be defective, VIRTUAL REALITY SOUND LABSTM will repair such defect, or replace the product, without charge for parts or labor subject to the following conditions:

1.All repairs must be performed by VIRTUAL REALITY SOUND LABSTM and/or it’s affiliates in Eatontown, New Jersey.

2.The equipment must not have been altered or been damaged through negligence, accident, or improper operation.

3.The replacement of parts are exempted from this warranty when replacement is necessary due to normal wear and tear.

4.All warranty claims must be accompanied by a copy of the sales receipt or bill of sale.

5.Repair or replacement parts supplied by VIRTUAL REALITY SOUND LABSTM under this warranty are protected only for the unexpired portion of the original warranty.

6.In the case of car stereos, this warranty does not extend to the elimination of car static or motor noise; correction of antenna problems; costs

incurred for the removal or reinstallation of the product; damage to tapes, speakers, accessories or car electrical systems. 7. VIRTUAL REALITY SOUND LABSTM will not be responsible for any charge incurred for installation.

OWNER'S RESPONSIBILITIES:

VIRTUAL REALITY SOUND LABSTM will make every effort to provide warranty service within a reasonable period of time.

SHOULD YOU HAVE ANY QUESTIONS ABOUT SERVICE RECEIVED, OR IF YOU WOULD LIKE ASSISTANCE IN OBTAINING SERVICE, PLEASE CALL TOLL FREE 1-800-445-1797, 8:30am - 4:30pm EST.

In order to provide you with the proper warranty service, we request that you adhere to the following procedure:

1.Include a copy of your sales receipt or bill of sale with your unit when it is returned for warranty service.

2.If it is necessary to return your product for service, please return it securely packed, preferably in the original shipping carton, and freight and insurance prepaid to the following address: VIRTUAL REALITY SOUND LABSTM, Service Department, 6 G Industrial Way West, Eatontown, New Jersey 07724.

3.Please include a detailed explanation of the problem you are having.

4.If your product is found by VIRTUAL REALITY SOUND LABS to have a defect in material or workmanship, within the warranty period, it will be repaired or replaced at no charge and returned to you prepaid. Where permitted by Iaw VIRTUAL REALITY SOUND LABSTM liability shall be limited to that set forth in this warranty. This warranty shall be the exclusive remedy of the purchaser.

VIRTUAL REALITY SOUND LABSTM makes no other warranty of any kind, expressed or implied; and all implied warranties, are hereby disclaimed by VIRTUAL REALITY SOUND LABSTM and excluded from this warranty, VIRTUAL REALITY SOUND LABSTM and/or it’s affiliates, the manufacturer, distributor and seller shall not be liable for any injury, loss or damage, incidental or consequential, arising out of the use or intended use of the product.

©2005 Virtual Reality Sound LabsTM. All designs, logos and images are the exclusive property of Virtual Reality Sound LabsTM and/or its affiliates. Design Patent Pending. All rights reserved. 050505 Printed in China 00000