Before You Install!
Automotive audio equipment installations can be troublesome at times, even to the most experienced of installation technicians. If you are not confident working with electrical wiring, removing and reinstalling interior panels, carpeting, dashboards or other components of your vehicle, please call our
1. Location
You can place the RTS2000T anywhere you have the space: rear seat, trunk, or behind the rear seat in trucks and pickups. DO NOT place the unit in a high unsecured location such as a rear seat window deck. Sudden stops can cause the unit to fly forward. The RTS2000T may also be used outside in DRY WEATHER ONLY. However, cables must be securely placed out of traffic areas to eliminate the possibility of tripping.
THE RTS2000T MUST BE SECURELY MOUNTED, driving styles and road conditions such as sudden stops, sharp curves and bumpy roads may cause unsecured items to move about the vehicle causing vehicle damage and/or physical injuries to vehicle occupants.
2. Installation
To replace your existing speakers with the RTS2000T speaker system, mark polarity of the speaker wires, disconnect them from speakers, and remove the existing speakers from your vehicle. Place the RTS2000T in the location you selected in your vehicle and connect the existing speaker wires. Make sure to have the polarity of the speakers and wires correct (positive wire to positive speaker terminal and negative, or ground wire to negative terminal) If you are installing the RTS2000T speaker system to be used as additional speakers, such as for the left & right rear channels, refer to your stereo's manual for polarity of the rear channels’ wires.
Tabs
Depress the tabs on the back of the RTS2000T, insert speaker wires, black wires are
Existing Front Speakers
LeftRight
| Stereo Receiver |
Left Rear | Right Rear |
Channel | Channel |
RTS2000T used as rear speakers