Zenoah HBZ2601 owner manual Maintenance, Transportation, Storage

Page 7

5. For safe operation

c)Do not allow bystanders in work area.

d)Do not point the blower nozzle in the direction of people or pets.

e)Always check to be sure that no debris has been blown onto someone else’s property.

f)Pay attention to the direction of the wind, do not work against the wind.

3. To minimize blowing time.

a)Use rakes and brooms to loosen debris before blowing.

b)In dusty conditions, slightly

dampen surfaces or use mister attachment when water is avail- able.

c)Conserve water by using power blowers instead of hoses for many lawn and garden applications, including areas such as gutters, screens, patios, grills, porches and gardens.

4.Never to touch the spark plug or plug cord while the engine is in operation. Doing so may result in being subjected to an electrical shock.

5.Never to touch the muffler, spark plug, or other metallic parts of the

engine while the engine is in op- eration or immediately after shut- ting down the engine. These me- tallic parts reach high tempera- tures during operation and doing so could result in serious burns.

6.After using blowers and other equipment, CLEAN UP! Dispose of debris in trash receptacles.

MAINTENANCE

1.In order to maintain your product in proper working order, perform the maintenance and checking operations described in the manual at regular intervals.

2.Always be sure to turn off the en- gine and disconnect the spark plug before performing any main- tenance or checking procedures.

WARNING

The metallic parts reach high tem- peratures immediately after stop- ping the engine.

HB2302 / HBZ2601

3. Examine the blower at intervals

 

for loose fasteners and rusted or

 

damaged parts. Use special care

 

around the fuel line, the muffler,

 

and the ignition wiring.

G

4. All engine service except for

B

those described in this manual

 

should be performed by compe-

 

tent service personnel. Improper

 

service to the blower fan and muf-

 

fler could cause a hazardous fail-

 

ure.

 

5. When replacing the any other

 

part, or any lubricant, always be

 

sure to use only Zenoah products

 

or products which have been cer-

 

tified by Zenoah for use with the

 

Zenoah product.

 

6. In the event that any part must be

 

replaced or any maintenance or

 

repair work not described in this

 

manual must be performed,

 

please contact a representative

 

from the store nearest Zenoah au-

 

thorized servicing dealer for as-

 

sistance.

 

7. Do not use any accessory or at-

 

tachment other than those bear-

 

ing the Zenoah mark and recom-

 

mended for the unit.

 

8. Under no circumstances should

 

you ever take apart the product

 

or alter it in any way. Doing so

 

might result in the product be-

 

coming damaged during opera-

 

tion or the product becoming un-

 

able to operate properly.

 

TRANSPORTATION

Drain the fuel from the fuel tank before transporting or storing the blower.

STORAGE

When storing the blower, choose a space indoors free from mois- ture and out of the reach of chil- dren.

GB-7

Image 7
Contents HB2302 HBZ2601 Explanation of Symbols and Safety Warnings Parts location ContentsSymbols on the machine SpecificationWorking Circumstance Avoid Noise ProblemFor safe operation Working ConditionBefore Starting Engine Using the ProductWorking Plan FuelTransportation MaintenanceStorage Blower Pipe Set upFueling the Unit HOW to MIX FuelFuel Recommended Mixing Ratio Gasoline 50 OILRestarting Engine While Engine is HOT Adjusting Idle SpeedOperation Starting EngineAIR Cleaner MaintenanceCleaning AIR Filter HB2302 Spark Plug Replacement Plug HB2302 Champion RCJ6Y HBZ2601 NGK CMR7AProcedures to be Performed After EV- ERY 100 Hours of USE Fuel FilterBefore Storing the Blower Maintenance StorageDisposal AIR Intake Screen AIR Inlet NETOptional vacuum kit usage Installing Elbow and Dust BagDust Collecting Operation Limited warranty Troubleshooting guideCheck Probable Causes Action
Related manuals
Manual 16 pages 32.89 Kb