PS Audio GCC-250 What voltages can the amp run on?, Higher wattage model should be considered

Page 12

®

What voltages can the amp run on?

Questions And Answers

Owner’s Reference GCC Power Amplifier Series

higher wattage model should be considered.

The GCC Control Amplifi er is specifi c to your country’s voltage. Do not use the GCC Control Amplifi er on a voltage higher than it is rated for. For instance, do not take a 120 volt rated GCC Control Amplifi er and attempt to use it in a 230 volt country. Failure to observe this cautionary note will void your warranty and may damage the amplifi er. If you need to operate the GCC Control Amplifi er at a voltage other than the voltage it was designed for, contact your dealer, distributor or the factory.

Protection circuitry

Does the amp require ventilation?

How does the DC trigger work?

If the GCC Control Amplifi er protection circuitry is activated, the amplifi er will immediately shut off and the fault will be indicated on the front panel display. Check for the source of the problem, then use the front panel logo switch to restart the amp.

The GCC Control Amplifi er produces little heat under normal operation. There are vent holes at the rear of the chassis, both top and bottom and you should be careful not to obstruct these vents if possible.

The GCC Control Amplifi er can remotely activate another piece of equipment, such as a second power amplifi er, by a DC control voltage. Using a small mini jack, you can use the GCC Control Amplifi er to turn on and off another piece of equipment with a 12 volt trigger. When connected to a GCA Control Amplifi er trigger input jack, located on the lower left hand corner of the GCA amplifi er’s rear panel (as you face the panel), the GCC Control Amplifi er will now turn the second amplifi er on and off with a push of the GCC’s front panel power button.

How do I dim the To dim the front panel display, you must use the remote control. On the control is a dim button. display?

4826 Sterling Drive, Boulder, CO 80301

Questions and Answers 8

PH: 720.406.8946 service@psaudio.com www.psaudio.com

 

©2004 PS Audio International Inc. All rights reserved.

Image 12
Contents Owner’s Reference DocumentIntroduction Important Safety Instructions IntroductionTable Of Contents Thank you Three models What you can expectIsolation Power Cables Conditioners Getting StartedLocation Getting StartedQuick Start Guide Quick Start GuideQuick Start Guide Setup instructions Setup InstructionsInput Name Editing Software version Placement? Front panel power buttonQuestions and Answers Isolation?What voltages can the amp run on? Higher wattage model should be consideredTroubleshooting TroubleshootingTroubleshooting Problems with subwoofers Specifi cations SpecificationsWarranty WarrantyConditions Remedy Miscellaneous Outside the US Service ServiceService

GCC-250 specifications

The PS Audio GCC-250 is a remarkable integrated amplifier that has captured the attention of audiophiles and music enthusiasts alike. With its unique blend of sophisticated technology and user-friendly design, it stands out in the crowded marketplace of audio equipment. The GCC-250 is a powerful, high-fidelity amplifier that brings music to life with clarity and precision.

One of the key features of the GCC-250 is its innovative Gain Cell technology. This proprietary technology allows for better control over volume and dynamic range, resulting in a more faithful reproduction of music. The Gain Cell replaces the traditional potentiometer with a fully balanced signal path, which helps to reduce distortion and maintain the integrity of the audio signal across all volume levels.

In terms of power, the GCC-250 delivers an impressive 250 watts per channel into 4 ohms, making it well-suited for driving a variety of speaker types and sizes. This ample power allows for an immersive listening experience, whether you're enjoying soft acoustic melodies or booming orchestral pieces. The amplifier is also equipped with a range of inputs, including balanced XLR and unbalanced RCA connections, ensuring versatility and compatibility with many source components.

Another noteworthy aspect of the GCC-250 is its elegant, minimalist design that complements any audio setup. The front panel features a sleek display, allowing users to easily adjust settings and monitor performance. The remote control adds convenience, giving users the ability to manipulate volume and input selections from the comfort of their seat.

The GCC-250 incorporates advanced thermal management technology to keep the amplifier cool even during extended listening sessions. This feature improves reliability and longevity, ensuring that the amplifier remains a staple of your audio system for years to come.

In conclusion, the PS Audio GCC-250 is a powerful integrated amplifier that combines cutting-edge technology with user-friendly features. With its Gain Cell design, impressive power output, versatile input options, and sleek aesthetics, it provides audiophiles with an exceptional sonic experience that is both enjoyable and immersive. Whether you're a casual listener or a dedicated enthusiast, the GCC-250 is sure to elevate your audio experience.