®
Input naming
Name the inputs whatever you want
Adjust the gain of each input
Home Theater bypass
Setup instructions
Owner’s Reference GCC Power Amplifier Series
Input Name Editing:
This mode allows you to edit the name of the Input on the Display.
The character with an underscore is the character that you are currently editing.
To edit the Input Name, you will use the following controls:
Mute Button –
This button allows you to move to the next character. When you press it, you will see the underscore move to the next character. When you reach the end of the line, the underscore will start again at the beginning of the line.
Volume Control Knob –
Turn the volume control knob to edit the current character. For your reference, here is a list of the possible characters:
0123456789:-#. ABCDEFGHIJKLMNOPQRSTUVWXYZ
When you are fi nished editing the name, hit either Input Up or Input Down to go to the next option, or hit the Power button to exit the Setup Menu.
Input Gain Editing:
This mode allows you to adjust the gain of each individual input relative to the other inputs. You can use this control to Gain match each of your components so that they are all at the same level on the volume control.
To edit the Input Gain, you will use the following controls:
Volume Control Knob –
Turn the volume control knob to edit the gain. You can go down to a minimum of
When you are fi nished editing the gain, hit either Input Up or Input Down to go to the next option, or hit the Power button to exit the Setup Menu.
Home Theater Bypass Mode:
This mode allows you to assign one of the Inputs as a Home Theater Bypass. This allows you to use your
4826 Sterling Drive, Boulder, CO 80301 | Setup Instructions 5 | |
PH: 720.406.8946 service@psaudio.com www.psaudio.com | ||
|
©2004 PS Audio International Inc. All rights reserved.