Makita G7300R, G7301R manuel dutilisation Troubleshooting, － 31－

Page 37

11. TROUBLESHOOTING

When generator engine fails to start after several attempts, or if no electricity is available at the output socket, check the following chart. If your generator still fails to start or generate electricity, contact your nearest Makita factory or authorized service center for further information or corrective procedures.

ENGLISH

When Engine Fails to Start :

Check if choke lever is in its proper position.

Check if fuel cock is open.

Check fuel level.

Check if engine switch is in OFF.

Check to make sure generator is not connected to an appliance.

Check spark plug for loose spark plug cap.

Set the choke lever to "CLOSE" position.

If closed, open fuel cock.

If empty, refill fuel tank making sure not to overfill.

Turn engine switch to ON.

If connected, turn off the power switch on the connected appliance and unplug.

If loose, push spark plug cap back into place.

Check spark plug for contamination.

Remove spark plug and clean electrode.

When No Electricity Is Generated at Receptacle :

Check to make sure AC circuit breaker is in the "ON" position.

Check AC receptacle and DC terminals for loose connection.

Check to see if engine starting was attempted with appliances already connected to generator.

After making sure that the total wattage of the electrical appliance is within permissible limits and there are no defects in the appliance, turn the AC circuit breaker to the "ON" position.

If breakers continue to actuate, consult your nearest servicing dealer.

Secure connection if necessary.

Turn off switch on the appliance, and disconnect cable from receptacle. Reconnect after generator has been started properly.

Low power.

Carbon brushes are excessively worn

－ 31－

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Generator Emission Component Defect Warranty Period Federal Emissions Component Defect WarrantyOwners Warranty Responsibilities British Columbia Richmond Vancouver Regional Office Factory Service Centers in Canada［CAUTION］ ForewordContents － 1－ Safety Precautions［CAUTION］ － 2－－ 3－ Specifications－ 4－ Components－ 5－ Control PanelCheck Engine OIL PRE-OPERATION Checks－ 6－ － 7－ Check Engine FuelRED Cable Battery InstalltionBlack Cable － 8－－ 9－ Checking Component Parts Grounding GeneratorCheck Generator Surroundings － 10－Starting Operating Procedures－ 11－ － 12－ ［Electric starter model］AC Application Using Electric Power－ 13－ － 14－ Style Ampere Receptacle AC plug Description － 15－Gfci Receptacle Full Power Switch－ 16－ － 17－ Connecting to Domestic Circuits House Wiring－ 18－ DC Application Safety Precautions While ChargingConnection of Cable － 19－OIL Sensor Stopping－ 20－ Idle Control HOW to USE Idle ControlChecking the Operation Stopping the Engine－ 22－ Wattage Information－ 23－ Voltage Drop in Electric Extension CordsSpark Arrester Spark Arrester－ 24－ Periodic Maintenance Maintenance ScheduleDaily Inspection － 25－－ 26－ Periodic Maintenance Schedule tableCleaning AIR Cleaner HOW-TO MaintenanceEngine OIL Change － 27－Cleaning Fuel Strainer Cleaning and Adjusting Spark PlugFuel Hose Replacement － 28－－ 29－ Checking Carbon Brush－ 30－ Preparation for Storage－ 31－ TroubleshootingWiring Diagram － 33－ Optional Parts HOW to Install the WHEEL, Handle and Roof Pipe－ 34－ Page Makita Corporation

G7300R, G7301R specifications

The Makita G7301R and G7300R are two exceptional tools that represent the brand's commitment to power and performance in the realm of industrial machinery. These models are designed for heavy-duty applications, making them ideal for professionals who demand reliability and efficiency.

At the heart of both models is a robust motor that delivers high torque, allowing users to tackle tough jobs with ease. The G7301R boasts an advanced 2000-watt motor, while the G7300R features a slightly lower wattage but is no less effective. Both motors are engineered for maximum performance and longevity, ensuring that they can withstand the rigors of daily use in commercial and industrial settings.

One of the standout features of these tools is their ergonomic design. Makita has prioritized user comfort with rubberized grips that reduce fatigue during extended use. The lightweight yet durable construction of both models allows for easy maneuverability, making them suitable for various tasks, from grinding to cutting.

Additionally, these tools incorporate advanced cooling systems that prevent overheating, extending their lifespan significantly. The ventilation design ensures optimal air intake and exhaust, minimizing the risk of damage during prolonged operation. This technology provides users with peace of mind, knowing that their equipment will perform reliably throughout demanding projects.

Safety is another crucial aspect of the G7301R and G7300R. Both models come equipped with multiple safety features, including overload protection, which automatically shuts down the motor when it detects excessive strain. This not only protects the tool but also ensures the user's safety by reducing the risk of accidents.

In terms of versatility, both models support a wide range of attachments and accessories, making them highly adaptable for different tasks. Whether you need to grind, polish, or cut, the Makita G7301R and G7300R can accommodate a variety of applications, further enhancing their utility for professional use.

In conclusion, the Makita G7301R and G7300R are prime examples of innovative engineering, providing users with powerful, reliable, and versatile tools designed for a range of heavy-duty applications. With their combination of advanced technology, ergonomic design, and safety features, these models stand out as must-have equipment for any serious tradesperson or contractor looking to elevate their work quality and efficiency.
Top Page Image Contents