Weed Eater XT300 instruction manual Operator Safety, Unit / Maintenance Safety, Fuel Safety

Page 2

WARNING: When using gardening appliances, basic safety precautions must al- ways be followed to reduce the risk of fire and serious injury. Read and follow all instruc- tions.

This power unit can be dangerous! Operator is responsible for following instructions and warn- ings on unit and in manual. Read entire instruc- tion manual before using unit! Be thoroughly fa- miliar with the controls and the proper use of the unit. Restrict the use of this unit to persons who have read, understand, and will follow the instructions and warnings on the unit and in the manual. Never allow children to operate this unit.

INSTRUCTION

SAFETY INFORMATION

MANUAL

ON THE UNIT

DANGER: Never use blades or flailing devices. This unit is designed for line trimmer use only. Use of any other accessories or at- tachments will increase the risk of injury.

WARNING: Trimmer line throws ob- jects violently. You and others can be blinded/in- jured. Wear eye and leg protection. Keep body parts clear of rotating line.

Eye Protection

 

 

 

 

 

Hazard Zone

 

 

50 ft.

 

 

Boots

(15 m)

 

Keep children, bystanders, and animals 50 feet (15 meters) away. If approached stop unit im- mediately.

If situations occur which are not covered in this manual, use care and good judgment. If you need assistance, contact your authorized service dealer or call 1-800-554--6723.

OPERATOR SAFETY

SDress properly. Always wear safety glasses or similar eye protection when operating, or performing maintenance, on your unit (safety glasses are available). Eye protection should

be marked Z87.

SAlways wear face or dust mask if operation is dusty.

2

SAlways wear heavy, long pants, long sleeves, boots, and gloves. Wearing safety leg guards

is recommended.

SAlways wear foot protection. Do not go bare- foot or wear sandals. Stay clear of spinning

line.

SSecure hair above shoulder length. Secure or remove loose clothing or clothing with loosely hanging ties, straps, tassels, etc. They can

be caught in moving parts.

S Being fully covered also helps protect you from debris and pieces of toxic plants thrown by spinning line.

SStay Alert. Do not operate this unit when you are tired, ill, upset or under the influence of al- cohol, drugs, or medication. Watch what you are doing; use common sense.

SWear hearing protection.

S Never start or run inside a closed room or building. Breathing exhaust fumes can kill.

SKeep handles free of oil and fuel.

UNIT / MAINTENANCE SAFETY

SDisconnect the spark plug before performing

maintenance except carburetor adjustments.

SLook for and replace damaged or loose parts before each use. Look for and repair fuel leaks before use. Keep in good working condition.

SReplace trimmer head parts that are chipped, cracked, broken, or damaged in any other

way before using the unit.

SMaintain unit according to recommended pro-

cedures. Keep cutting line at proper length.

SUse only 0.080! (2 mm) diameter Weed Eat- erbrand line. Never use wire, rope, string, etc.

S Install required shield properly before using the unit. Use only specified trimmer head; make sure it is properly installed and securely fastened.

S Make sure unit is assembled correctly as shown in this manual.

SMake carburetor adjustments with lower end supported to prevent line from contacting any object.

S Keep others away when making carburetor adjustments.

S Use only recommended Weed Eaterac- cessories and replacement parts.

S Have all maintenance and service not ex- plained in this manual performed by an autho- rized service dealer.

FUEL SAFETY

SMix and pour fuel outdoors.

SKeep away from sparks or flames. S Use a container approved for fuel.

S Do not smoke or allow smoking near fuel or the unit.

S Avoid spilling fuel or oil. Wipe up all fuel spills. S Move at least 10 feet (3 meters) away from

fueling site before starting engine.

S Stop engine and allow to cool before remov- ing fuel cap.

S Always store gasoline in a container ap- proved for flammable liquids.

Image 2
Contents Manual de Instrucciones Manuel d’Instructions Fuel Safety Operator SafetyUnit / Maintenance Safety Transporting and Storage Cutting SafetyAdjusting the Handle Attaching ShieldKnow Your Trimmer ON/STOP Switch ChokeHOW to Stop Your Unit Primer BulbStarting a Flooded Engine HOW to Start Your UnitStarting a Warm Engine Operating PositionTrimmer Line Advance Cutting MethodsLine Replacement Inspect and Clean UnitClean AIR Filter Check for Loose Fasteners and PartsSeasonal Storage Carburetor AdjustmentEngine Fuel System OtherTroubleshooting Table Cause Remedy Agency and POULAN/WEED EATER, Divi

XT300 specifications

The Weed Eater XT300 is a versatile and powerful string trimmer designed to make yard work more efficient and manageable. With its blend of innovative features and advanced technologies, it stands out as an essential tool for both casual gardeners and professional landscapers alike.

One of the main features of the XT300 is its robust 30cc two-cycle engine, which provides ample power to tackle even the toughest overgrowth. This engine is designed for optimal performance, delivering a smooth and consistent power output that allows you to cut through thick grass and weeds with ease. Additionally, the XT300’s lightweight design makes it easy to maneuver, reducing user fatigue during extended periods of operation.

Another noteworthy characteristic of the XT300 is its Easy Start system. This technology simplifies the starting process, allowing users to get to work quickly without the frustration often associated with recoil starters. With just a few gentle pulls, the engine fires up, making it ideal for users of all experience levels.

The XT300 also features a 17-inch cutting swath, enabling efficient trimming of large areas in a single pass. This wide cutting path reduces the time and effort required to complete your yard maintenance tasks, making it a time-saving asset. The trimmer is equipped with a bump feed head that allows for quick and efficient line advancement, ensuring that you can continue working without the need for constant interruptions.

Durability is another key aspect of the XT300, as its construction includes high-quality materials designed to withstand the rigors of outdoor use. The trimmer’s solid build means that it can handle bumps and scrapes without compromising performance over time. Safety features, including a protective guard, further enhance its usability while providing peace of mind during operation.

Additionally, the ergonomic design of the XT300 includes an adjustable handle that provides comfort and control, enabling users to trim with precision even in hard-to-reach areas. The balance and lightweight nature of the trimmer contribute to its ease of use, making it suitable for users of all physical capabilities.

In summary, the Weed Eater XT300 is a powerful and reliable string trimmer perfect for any landscaping job. With its features like a potent engine, Easy Start technology, a generous cutting swath, and an emphasis on comfort and durability, this tool is built to help you maintain a well-groomed yard with ease and efficiency.