Murray F-98526, 22506x9A manual Check the Level of CUT, HOW to Prepare the Mower for Storage

Page 18

MAINTENANCE

5.Make sure the blade is balanced. Use a screwdriver and hold the blade parallel to

the ground as shown. A blade that is bal- anced will stay parallelto the ground. Ifthe blade is not balanced, the heavy end will rotate toward the ground. Sharpen the heavy end until the blade is balanced.

6.A new blade will cut better than a badly worn blade. Every two years replace the old blade with a factory replacement blade.

Push in on lower handle.

CHECK THE LEVEL OF CUT

Test the unit in a small area. If the height of cut is not level or ifthe cutgrass is not discharged,

the cause can be: (1) the blade is bent or darn-

aged, (2) the blade is not sharp, (3) a wornFigure 16 blade, (4) or a broken blade adapter. Before

you use the unit, correct the problem.

FOLDING HANDLE STORAGE

CAUTION: Be careful when you fold or

raise the handle. Do not damage the cables. A cable that is bent will not work

correctly. Before you use the unit, replace a bent or damaged cable.

How To Fold The Handle

1.Loosen the knobs that hold the upper part of the handle to the lower part of the han-

dle. As you fold the handle, make sure the cables are not around the loose fasteners

and do not become damaged. Rotate the upper part of the handle toward the back of the unit (Figure 16).

2.Loosen the knobs on the lower handle

(Figure 17). Push in on the ends of the lower handle. Move the ends of the lower

handle past the locking tabs.

3.Rotate the handle forward over the en- gine. Make sure the cables are not dam- aged.

HOW TO PREPARE THE MOWER FOR STORAGE

WARNING: Do not remove gaso-

Lower Handle

Locking

Tabs

Knob.

Figure 17

How To Raise The Handle

1.Pull the handle back until the ends of the lower handle lock into position.

2.Lift the upper part of the handle intothe op- erator's position. Tighten the fasteners that hold the handle.

4.Remove the spark plug from the cylinder.

Pour one ounce of oil into the cylinder.

Slowly pull the recoil-start grip so that the oil will protect the cylinder. Install a new

spark plug in the cylinder.

a fire, or while you smoke.

,_ line while inside a building, near Gasoline fumes can cause an

explosion or a fire.

1.Drain the fuel tank.

2.Let the engine run untitit is out of gasoline.

3.Drain the oil from the warm engine. Fill the

engine crankcase with new oil.

F-9852618

5.Clean the dirt and debris from the cylinder cooling fins and the engine housing.

6.Clean the bottom of the mower housing.

7.Completely clean the mower to protect the paint.

8.Put the unit in a building that has good ven- tilation.

Image 18
Contents Model MURRAY, INC. Two Year LimitedWarranty MURRAY, INCOwners Information Responsibility of the OwnerSafe Operation Practices for Walk-Behind Mowers Donot Safe Mowing Guide Safe Mowing Guide Safe Mowing Guide Safe Mowing Guide Steps to Follow Before Mowing While MowingAfter Mowing Preparation Unpacking InstructionsHowto Adjustthe Handleheight High LOWHOW to Prepare the Engine Final AssemblyEngine does not Contain OIL or Gasoline Mulcher Plate Removal and Installation Mulching TipsOperation HOW to Stop the EngineHOW to Start Engine Engine Stop LeverHOW to Clean Mower Housing MaintenanceEngine Maintenance HOW to Adjust Height of CUTHOW to Remove the Blade HOW to Sharpen the BladeHOW to Prepare the Mower for Storage Check the Level of CUTFolding Handle Storage Trouble Shooting Chart Repair Parts KEY Description Part Model 22506x9AREPAIR Parts KEY DescriptionFrom the following chart 98526 98526 9852626 Neverupordownslopes HOW to Order Repair Parts MURRAY,INC. Lawnmowercentralpartsdistributors

22506x9A, F-98526 specifications

Murray F-98526,22506x9A is an advanced piece of equipment designed for diverse industrial applications. This model stands out for its robust build quality and cutting-edge technologies, making it a reliable choice for various operational requirements.

One of the primary features of the Murray F-98526,22506x9A is its versatile performance capabilities. The machine is engineered to handle a wide range of tasks, from heavy-duty operations to more delicate processes. Its adaptable nature ensures that it can be employed in numerous sectors, including manufacturing, construction, and logistics.

The Murray F-98526,22506x9A is equipped with a state-of-the-art control system that enhances its operational efficiency. This technology allows users to monitor and adjust performance settings in real-time, leading to improved precision and reduced downtime. The control interface is user-friendly, ensuring that operators can quickly become acquainted with the system, which is vital for maintaining productivity in fast-paced environments.

In terms of durability, the Murray F-98526,22506x9A boasts a robust framework engineered to withstand the rigors of industrial settings. The materials used in its construction are selected for their resilience, ensuring that the equipment can endure exposure to harsh conditions without compromising performance. This reliability is further complemented by a maintenance-friendly design, allowing for easy access to key components for servicing and repairs.

Safety features are also a significant highlight of the Murray F-98526,22506x9A. The machine is equipped with advanced safety protocols, including automated shutdown systems and emergency stop buttons. These features work to minimize risk and protect both operators and the machinery itself, fostering a secure working environment.

The energy efficiency of the Murray F-98526,22506x9A is another standout characteristic. The equipment is designed to optimize energy consumption, reducing operational costs while simultaneously minimizing its environmental footprint. This aspect is increasingly critical as industries strive for sustainability and regulatory compliance.

In summary, the Murray F-98526,22506x9A is a versatile, robust, and technologically advanced machine suitable for various industrial applications. Its combination of adaptability, user-friendly control systems, durability, safety features, and energy efficiency positions it as an ideal choice for businesses seeking reliability and performance in their operational workflows. With this equipment, organizations can look forward to enhanced productivity and operational excellence.