Murray MB12538LT manual Service and Adjustments, To Remove Mower See Fig, To Install Mower See Fig

Page 19

SERVICE AND ADJUSTMENTS

WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SERVICE OR ADJUST- MENTS:

Depress clutch/brake pedal fully and set parking brake.

Place gearshift lever in neutral (N) position.

Place attachment clutch in “DISENGAGED” position.

Turn ignition key to “STOP” and remove key.

Make sure the blades and all moving parts have completely stopped.

Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

TRACTOR

TO REMOVE MOWER (See Fig. 13)

Mower will be easier to remove from the right side of trac- tor.

Place attachment clutch in “DISENGAGED” position.

Move attachment lift lever forward to lower mower to its lowest position.

Roll belt off engine pulley.

Remove small retainer spring, and remove clutch spring off pulley bolt.

Remove large retainer spring, slide collar off and push housing guide out of bracket.

Disconnect anti-swaybar from chassis bracket by re- moving retainer spring.

Disconnect suspension arms from rear deck brackets by removing retainer springs.

Disconnect front links from deck by removing retainer springs.

Raise lift lever to raise suspension arms. Slide mower out from under tractor.

IMPORTANT: IF AN ATTACHMENT OTHERTHANTHE MOWER DECK IS TO BE MOUNTED ON THE TRACTOR, REMOVE THE FRONT LINKS AND HOOK THE CLUTCH SPRING INTO SQUARE HOLE IN FRAME.

TO INSTALL MOWER (See Fig. 13)

Raise attachment lift lever to its highest position.

Slide mower under tractor with defl ector shield to right side of tractor.

Lower lift lever to its lowest position.

Connect front links to mower deck and secure with retainer springs..

Connect suspension arms to rear deck brackets and secure with retainer springs.

Connect anti-swaybar to chassis bracket and secure with retainer spring.

Push clutch cable housing guide into bracket, slide col- lar onto guide and secure with large retainer spring.

Place fl at washer and clutch spring on idler pulley bolt and secure with small retainer spring.

Make sure belt is inside the belt keeper at the idler and on both sides of the wire belt keeper as shown.

Install belt onto engine pulley.

IMPORTANT: CHECK BELT FOR PROPER ROUTING IN ALL MOWER PULLEY GROOVES.

SMALL RETAINER SPRING

 

 

FLAT WASHER

 

WIRE BELT KEEPER

 

 

CLUTCH SPRING

 

 

SUSPENSION ARMS

 

 

 

BELT KEEPER

 

 

 

 

 

SQUARE HOLE

RETAINER SPRING

 

 

ENGINE PULLEY

ANTI-SWAY BAR

 

 

 

 

FRONT LINK

COLLAR

 

 

 

 

 

HOUSING GUIDE

 

 

RETAINER SPRINGS

 

 

 

(BOTH SIDES)

LARGE

BRACKET

02845

 

 

DEFLECTOR SHIELD

RETAINER

CLUTCH SPRING

SPRING

 

FIG. 13

19

Image 19
Contents Always Wear EYE Protection During Operation MB12538LTII. Slope Operation Safety RulesSafe Operation Practices for Ride-On Mowers General OperationIV. Towing ServiceGeneral Service III. ChildrenTable of Contents Contents of Hardware Pack Before Removing Tractor from Skid AssemblyTools Required for Assembly To Remove Tractor from CartonCheck Battery See Fig Check Brake System Check Tire PressureCheck Deck Levelness Check for Proper Position of ALL BeltsOperation Know Your Tractor HOW to USE Your Tractor To Transport Reverse Operation System ROSTo Operate Mower See Fig To Operate on HillsTo Start Engine See Fig Before Starting the EngineCheck Engine OIL Level ADD GasolineMowing Tips General Recommendations MaintenanceBlade Removal See Fig TractorTo Sharpen Blade See Fig Transaxle Cooling BatteryEngine BeltsMuffler CleaningClean AIR Screen AIR FilterTo Install Mower See Fig Service and AdjustmentsTo Remove Mower See Fig Belt Removal To Level Mower HousingBelt Installation To Replace Mower Blade Drive Belt See FigTo Check Brake To Check and Adjust Brake See FigTo Adjust Brake To Replace Motion Drive Belt See FigFront Wheel TOE-IN/CAMBER Transaxle Gear Shift Lever NEUTRAL- Adjustment See FigTo Adjust Steering Wheel ALIGN- Ment To Start Engine with a Weak Battery See FigTo Replace Headlight Bulb To Adjust Throttle Control CableTo Adjust Choke Control To Adjust CarburetorEngine OIL StorageOther Fuel SystemProblem Cause Correction Troubleshooting PointsEngine dies when Limited Warranty Only Ride UP and Down Hill Not Across Hill Degrees MAX Suggested Guide for Sighting Slopes for Safe Operation

MB12538LT specifications

The Murray MB12538LT is a versatile and robust lawn mower designed for both residential and light commercial use. This model combines innovative technology with user-friendly features, making it an excellent choice for homeowners and landscaping professionals alike. One of the standout features of the MB12538LT is its powerful 125cc engine, which provides ample power to tackle tough mowing conditions. The engine is designed for efficiency, ensuring that users can cover more ground with less fuel consumption.

Another significant characteristic of the Murray MB12538LT is its cutting deck. With a 38-inch cutting width, it allows for efficient mowing of medium to large lawns. The deck is constructed from durable materials, ensuring longevity and resistance to wear and tear. Additionally, the mower offers multiple cutting heights, ranging from 1 inch to 3.5 inches, allowing users to customize their mowing experience based on the grass type and condition.

Murray has integrated advanced technologies into the MB12538LT to enhance user experience. The push-button start feature simplifies the starting process, eliminating the need for cumbersome pull cords. The mower also includes an ergonomic handle that can be adjusted for comfort, aiding users in maintaining a healthy posture while mowing.

One of the most appealing aspects of the MB12538LT is its lightweight design, which makes it easy to maneuver in tight spaces and around obstacles such as trees and flower beds. The rear-wheel drive system enhances traction, providing stability and control on slopes and uneven terrain.

Maintenance is straightforward with the Murray MB12538LT, as it is equipped with readily accessible components for easy oil changes and blade replacement. The mower's design includes a grass bagging option, allowing for efficient grass collection and disposal, which promotes a cleaner lawn and reduces the need for raking.

In summary, the Murray MB12538LT is an excellent choice for those seeking a reliable, easy-to-use lawn mower with essential features that promote efficiency and comfort. With its powerful engine, durable construction, and thoughtful design, it stands out in the crowded market of lawn care equipment. Whether you're a homeowner looking to maintain a tidy lawn or a professional landscaper in need of an efficient tool, the MB12538LT meets various mowing needs with reliability and performance.