Murray 425603x99A manual HOW to Replace the Fuse, HOW to Replace the Light Bulb, Engine, Battery

Page 33

MAINTENANCE

HOW TO REPLACE THE FUSE

If the fuse is blown, the engine will not start. The location of the fuse is next to the battery. Remove the fuse and replace with a automotive fuse (Figure 37).

Automotive Fuse

Figure 37

HOW TO REPLACE THE LIGHT BULB

1.Raise the tractor hood.

2.Turn the light socket until the tabs on the socket align with the notches in the bezel (Figure 38). Remove the light socket. Turn the light bulb and remove the bulb.

3.Install a new light bulb. Align the light socket with the notches in the bezel and turn the light socket to lock in position.

 

Bezel

 

Light Bulb

Light Socket

Figure 38

 

HOW TO CLEAN THE MOWER HOUSING

WARNING: Before you clean the mower housing, stop the engine and disconnect the wire to the spark plug.

Grass and other debris on top of the mower housing can keep the belt from working correctly. For safety and correct operation, frequently clean the top of the mower housing. Remove grass and debris from around the pulleys and other moving parts.

1.Move the lever for the blade rotation control to the ENGAGE position.

2.Clean the top of the mower housing.

3.Move the lever for the blade rotation control to the DISENGAGE position.

4.Again clean the top of the mower housing.

5.After you cut the grass, clean the bottom of the mower housing.

STORAGE (over 30 days)

At the end of each year, prepare the unit for storage as follows.

THE ENGINE

For storage information, see the the engine manufacturer’s instructions.

THE BATTERY

1.Remove the battery.

2.Clean the battery terminals of any deposits.

3.Charge the battery. See the instructions on “How To Prepare And Charge The Battery”.

4.Store the battery in a cool, dry place.

NOTE: After a long time in storage, charge the battery.

1.Start the engine.

2.Run the engine until the fuel tank and the carburetor are out of fuel and the engine stops.

3.Do not leave fuel in the fuel tank or the carburetor. The fuel can damage the function of the fuel system. Some models have a fuel drain (Figure 39). Hold a cloth under the fuel drain. Push the fuel drain until the carburetor is empty.

4.After storage, make sure you use fresh fuel.

Fuel Drain

Figure 39

THE FUEL SYSTEM

WARNING: Do not drain the gasoline inside a build- ing or near a fire. Do not smoke because the fumes from the fuel can cause an explosion.

CLEAN THE UNIT

1.Clean the dirt and grass from the engine.

2.Clean the mower housing.

LUBRICATE THE UNIT

See the “Lubrication” instructions in this book.

F–030738L

33

Image 33
Contents Model Table of Contents OWNER’S Information Environmental AwarenessSafe Operation Practices for Ride-on Mowers II. Slope operation Safe Mowing Guide Safe Mowing Guide Safe Mowing Guide Before Mowing Steps to FollowInternational Pictorials Safety Warning PictorialsInternational Pictorials Control And Operating PictorialsAssembly AssemblyHOW to Assemble the Steering Wheel HOW to Install the Seat100105417x47 25x3 17x146HOW to Charge Maintenance Free Battery Maintenance Free BatteryHOW to Install the Battery Cables Remove the battery and battery trayCheck the Level of the Mower Housing HOW to Prepare the EngineIMPORTANT! Before YOU Start Mowing Check the TiresLocation of Controls OperationAttachments HOW to USE the Throttle ControlHOW to Disconnect the Transmission HOW to USE the Speed Control PedalTo 1/2 To 2/3HOW to Change the Cutting Height HOW to SET the Parking BrakeHOW to Stop the Unit HOW to Transport the UnitHOW to Operate the Unit on Hills HOW to Operate with the Mower HousingHOW to Start the Engine Before Starting the EngineCarburetor Mowing and Bagging Tips Operating TipsFrequency Maintenance Required Comments MaintenanceHOW to Check the Muffler General RecommendationsHOW to Sharpen the Blade HOW to Remove and Install the BladeInspect Blade Mount the blade and blade adapter on the mandrelHOW to Adjust the Blade Rotation Control Remove the 1/4 inch 6 mm pin or bolt Figure HOW to Check and Adjust the Motion Drive BeltDisconnect the red cable from the positive + terminal HOW to Check and Adjust the Drive BrakeHOW to Check the Fuel Filter Where to LubricateHOW to Remove the Mower Housing HOW to Install the Mower HousingRemove the mower drive belt from the stack pulley HOW to Adjust the Gauge Wheels Lift Lever Hole No Position No5,6 HOW to Level the Mower Housing HOW to Replace the Motion Drive Belt Install the mid-idler pulleyRemove the mid-idler pulley HOW to Replace the Mower Drive Belt Fasten the rear wheel with washer and e-ring HOW to Install the WheelsHOW to Replace the Light Bulb HOW to Replace the FuseHOW to Clean the Mower Housing BatteryTrouble Shooting Chart USA 030738LChassis & Hood Repair PartsKey Description Drive Assembly Drive Assembly Steering Repair Parts Mower Housing Suspension Repair Parts Mower Housing 7601032 Model 425603x99AREPAIR Parts Engine Mount Assembly Engine Mount Assembly Repair Parts Electrical System Key Part Description Electrical System030738L Index Model No Bushel Capacity Model No

425603x99A specifications

Murray 425603x99A is a significant advancement in the field of outdoor power equipment, combining innovative technologies with user-centric features to deliver an exceptional performance. This model is primarily designed for tackling heavy-duty landscaping tasks with efficiency and ease, making it a top choice among both professional landscapers and avid gardeners.

One of the standout features of the Murray 425603x99A is its powerful engine. Equipped with a robust four-stroke engine, this model offers high torque and reliable power, ensuring that it can handle challenging terrains and thick underbrush without faltering. The engine is not only powerful but also designed with fuel efficiency in mind, allowing users to complete more tasks on less fuel, which is both cost-effective and environmentally friendly.

The design of the Murray 425603x99A emphasizes user comfort and control. Its ergonomic handlebar system provides a comfortable grip and reduces vibrations, minimizing fatigue during extended periods of use. The adjustable height feature allows operators to customize the machine to suit their specific working conditions and personal preferences, enhancing overall user experience.

In terms of cutting technology, the Murray 425603x99A comes with a precision cutting deck that ensures clean and even cuts across various grass types. The deck’s design promotes excellent grass discharge performance, making it easy to manage clippings while maintaining a pristine lawn appearance. Additionally, the mower features multiple cutting height adjustments, providing versatility from a low trim to a more substantial grass length.

Safety is a critical consideration in the design of the Murray 425603x99A. It includes several safety features, such as an automatic shut-off function that engages when the operator releases the handle, preventing accidental starts. The sturdy construction of the mower also adds to its durability, ensuring that it can withstand the rigors of frequent use.

Moreover, the Murray 425603x99A is compatible with a range of accessories, allowing for personalized modifications to its functionality. Users can equip it with baggers, mulchers, and other attachments to enhance its versatility across different tasks.

Overall, the Murray 425603x99A stands out as a well-engineered and dependable outdoor power equipment choice. Its combination of power, precision, and thoughtful design features make it an excellent investment for anyone seeking durability and performance in their landscaping endeavors. Whether for commercial or residential use, this model promises to deliver results that exceed expectations.