®
Introduction
Owner’s Reference
Important Safety Instructions
Read these instructions
Heed all warnings
Follow all instructions
WARNING. TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
Clean only with a dry cloth.
Do not place fl ammable material on top of or beneath the component.
All PS Audio components require adequate ventilation at all times during operation. Rack mounting is acceptable where appropriate.
Do not remove or bypass the ground pin on the end of the AC cord unless absolutely necessary to reduce hum from ground loops of connected equipment. This may cause RFI (radio frequency interference) to be induced into your playback setup. All PS products ship with a grounding type plug. If the provided plug does not fi t into your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Unplug this apparatus during lightning storms or when unused for long periods of time.
When making connections to this or any other component, make sure all components are off. Turn off all systems’ power before connecting the PS Audio component to any other component. Make sure all cable terminations are of the highest quality.
There are no user serviceable fuses inside this product.
THERE ARE NO
Please contact your authorized dealer, distributor, or PS Audio if you have any questions not addressed in this reference manual.
This product is manufactured in the United States of America. PS Audio® is a registered trademark of PS Audio International Inc., and is restricted for use by PS Audio International, Inc., its subsidiaries, and authorized agents.
4826 Sterling Drive, Boulder, CO 80301 | Introduction ii | |
PH: 720.406.8946 service@psaudio.com www.psaudio.com | ||
|
©2006 PS Audio International Inc. All rights reserved.