Murray 22" Self-Propelled manual Check the Level of CUT, Storage for NON-FOLDING Upper Handles

Page 24

MAINTENANCE

 

Blade

 

File

Screwdriver

Blade is balanced

 

 

when parallel to

 

the ground.

Ground

Figure 30

 

CHECK THE LEVEL OF CUT

Test the unit in a small area. If the height of cut is not level or if the cut grass is not discharged, the cause can be: (1) the blade is bent or dam- aged, (2) the blade is not sharp, (3) a worn blade, (4) or a broken blade adapter. Before you use the unit, correct the problem.

STORAGE FOR HANDLES THAT FOLD

CAUTION: Be careful when you fold or raise the handle. Do not damage the cables. A cable that is bent will not work correctly. Before you use the unit, replace a bent or damaged cable.

How To Fold The Handle

1.Loosen the fasteners that hold the upper part of the handle to the lower part of the handle. As you fold the handle, make sure the cables are not around the loose fasten- ers and do not become damaged. Rotate the upper part of the handle back (Figure 31).

2.Loosen the knobs on the lower handle. Push in on the ends of the lower handle.

3.Rotate the handle forward over the engine as shown. Make sure the cables are not damaged.

Folding Handle

Figure 31

How To Raise The Handle

1.Pull the handle back until the ends of the lower handle lock into position. Tighten the knobs.

2.Lift the upper part of the handle into the op- erator’s position. Tighten the fasteners that hold the handle.

STORAGE FOR NON-FOLDING UPPER HANDLES

For storage, fold the handle forward.

How To Fold The Handle

1.Push in on the ends of the lower handle. Move the ends of the lower handle past the locking tabs.

2.Rotate the handle forward over the en- gine. Make sure the cables are not dam- aged.

How To Raise The Handle

1.Pull the handle back until the ends of the lower handle lock into position.

HOW TO PREPARE

THE MOWER FOR STORAGE

WARNING: Do not remove gaso- line while inside a building, near a fire, or while you smoke. Gasoline fumes can cause an explosion or a fire.

1.Drain the fuel tank.

2.Let the engine run until it is out of gasoline.

3.Drain the oil from the warm engine. Fill the engine crankcase with new oil.

4.Remove the spark plug from the cylinder.

F-040411L

24

Pour one ounce of oil into the cylinder. Slowly pull the recoil-start grip so that the oil will protect the cylinder. Install a new spark plug in the cylinder.

5.Clean the dirt and debris from the cylinder cooling fins and the engine housing.

6.Clean the bottom of the mower housing.

7.Make sure the grass bag is empty of grass. Grass remaining in the bag during storage will damage the bag.

8.Completely clean the mower to protect the paint.

9.Put the unit in a building that has good ven- tilation.

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Models MURRAY, INC. Two Year Limited Warranty OWNER’S Information Responsibility of the OwnerSafe Operation Practices for Walk-Behind Mowers Use only original equipment or authorized replacement parts Do notSafe Mowing Guide Make the clean up after mowing easier Adjustment,except carburetor, while the enAccessory and the mower Bruises, or even put out an eye. Often the perStitutions as service parts. If you need profes Sional service, select a shop that is anAuthorized Service Center for your brand Mower. If you plan to service the unit yourselfPosition when mowing and bagging. When Ufacturer’s recommended replacement partBefore using the grass catcher again When the front of the mower has come upSteps to Follow Before Mowing While MowingAfter Mowing Preparation Unpacking InstructionsLower HandleBolt BracketModels with Optional Grass BAG HOW to Mount the Grass BAG HOW to Empty the Grass BAGGrass Bag Top Cover HOW to Attach the Side Mounted Discharge Deflector Mulching TipsHOW to Prepare the Engine Final AssemblyElectric Start Models HOW to Stop the Engine OperationEngine Stop Lever Front Wheel Drive SystemHOW to Start Engine HOW to Operate the MowerMaintenance Electric Start Models HOW to Charge the BatteryHOW to Remove the Battery Battery BracketEngine Maintenance HOW to Clean HOW to Adjust Mower Housing Height of CUTLubrication Drive Belt Belt Tension Bolt Blade Spacer Adjuster Nut Belt Tension BoltPulley HOW to Adjust the Drive Cable Blade Service HOW to Remove the BladeHOW to Sharpen the Blade Sharpen the blade two times a year or ev- ery 25 hoursHOW to Prepare Mower for Storage Check the Level of CUTStorage for NON-FOLDING Upper Handles Trouble Shooting Chart Engine will not start040411L 040411L Mulcher Models Description Side Discharge Models 071780 Cover, Dust 043629 Pin, Drive Mulcher Models with 14 Rear Wheels 001x85 Bolt 0020x3 Washer 672916E700 Baffle, Rear 672918 Side Discharge Models with 14 Rear Wheels 17x124 Washer Handle RECOIL-START Models Handle ELECTRIC-START Models Frame Assembly Grass BAG040411L HOW to Order Repair Parts MURRAY, INC. Lawn Mower Central Parts Distributors

22" Self-Propelled specifications

The Murray 22" Self-Propelled Mower is an exceptional piece of lawn care equipment designed to deliver both power and ease of use. With its reliable performance, this mower is perfect for homeowners who value efficiency and ease while maintaining their lawns.

At the heart of the Murray self-propelled mower is its robust 159cc engine, designed to provide the necessary torque to tackle various types of grass, from thick sections to lightly overgrown patches. This powerful engine ensures that users can complete their mowing tasks with minimal interruptions and effort, even in demanding conditions. The self-propelled drive system allows the mower to glide effortlessly across the yard, reducing operator fatigue and making it ideal for larger properties.

One of the standout features of the Murray 22" mower is its adjustable cutting height. With several positions to choose from, users can customize the cutting length to suit their lawn's specific needs, whether it's a close trim or a longer cut for a healthier lawn. The 22-inch cutting deck provides a wide swath, enabling homeowners to cover more ground in less time and reduce the number of passes required to achieve a neat finish.

The mower is designed with user convenience in mind. Its lightweight construction makes it easy to maneuver around flower beds and other obstacles, while the foldable handle allows for compact storage in sheds or garages when not in use. Additionally, the 2-in-1 cutting system offers both mulching and rear-bagging capabilities, giving users the flexibility to choose how they handle clippings.

Equipped with durable wheels, the Murray 22" mower maneuvers smoothly over different terrains. Its rugged tires provide excellent traction, making it suitable for various lawn types, whether flat or slightly sloped. Furthermore, the mower features a reliable recoil starting system, ensuring that it's ready to go when you are.

In terms of maintenance, the Murray self-propelled mower is designed for simplicity. Its easy access to the engine and cutting deck makes routine maintenance tasks like oil changes and blade sharpening straightforward, prolonging the mower's lifespan.

Overall, the Murray 22" Self-Propelled Mower combines power, versatility, and ease of use, making it an attractive option for homeowners seeking an effective solution for their lawn maintenance needs.
Top Page Image Contents