Murray 22" Self-Propelled manual Trouble Shooting Chart, Engine will not start

Page 25

TROUBLE SHOOTING CHART

The Engine will not start.

1.Move the throttle control lever to the FAST or START position.

2.Make sure the fuel tank is filled with clean gasoline. Do not use old gasoline.

3.On a cold engine, push the primer button (optional on some models) five times.

4.Make sure the wire for the spark plug is connected to the spark plug.

5.Adjust the Carburetor. See the “Engine Instruction Book”.

6.There is too much gasoline in the engine cylinder. Remove and dry the spark plug. Put the throttle control in the SLOW position. Pull the recoil-start grip several times. Install the spark plug. Connect the wire to the spark plug. Start the engine.

7.The engine is difficult to start in heavy or high grass. Move the mower to a clean dry surface.

8.Make sure the engine stop lever is in the operating position.

9.Make sure the fuel valve is in the ON position. See the “Engine Instruction Book”.

10.On electric start models, make sure the wiring harness is connected. Charge the battery.

The Engine will not stop.

1.Release the engine stop lever.

2.Check the engine stop cable. Replace the cable if bent or damaged.

The Engine performance is bad.

1.Check the height of cut settings. Raise the height of cut if the grass is high.

2.Check the bottom of the blade housing. Clean the blade housing of grass and other debris.

3.Check the wire to the spark plug. Make sure the wire is connected.

4.Clean the engine cooling fins of grass and other debris.

5.Check the carburetor adjustments. See the “Engine Instruction Book”.

6.Check the spark plug gap. Set the spark plug gap at 0.030”.

7.Check the amount of oil in the engine. Fill with oil if necessary.

8.Check the engine air cleaner. See the “Engine Instruction Book”.

9.The gasoline is bad. Drain and clean the fuel tank. Fill the fuel tank with clean gasoline.

10.Check the throttle control. Make sure the lever is not in the CHOKE position.

Excessive Vibration.

1.Remove the blade. Check the blade and balance if necessary. See the blade maintenance instructions.

2.Check for a bent or broken blade. A DAMAGED BLADE IS DANGEROUS AND MUST BE REPLACED.

3.Check the blade adapter. REPLACE A BROKEN BLADE ADAPTER.

4.If the vibration continues, take the mower to an Authorized Service Center.

The grass will not discharge correctly.

1.Clean the bottom of the mower housing.

2.Check for a badly worn blade. Remove and sharpen the blade. For safety, replace the blade every two years with a factory replacement blade.

3.Move the throttle control lever to the FAST position. Check the speed of the engine according to the “Engine Instruction Book”.

The grass is not cut even.

1.

Check the height adjustment at each wheel. The height adjustment must be the same for each

 

wheel.

 

2.

Make sure the blade is sharp.

 

3.

Check for a bent or broken blade. A DAMAGED BLADE IS DANGEROUS AND MUST BE

 

REPLACED.

 

4.

Check for a broken blade adapter. REPLACE A BROKEN BLADE ADAPTER.

F-040411L

25

Image 25
Contents Models MURRAY, INC. Two Year Limited Warranty Responsibility of the Owner OWNER’S InformationSafe Operation Practices for Walk-Behind Mowers Do not Use only original equipment or authorized replacement partsSafe Mowing Guide Adjustment,except carburetor, while the en Make the clean up after mowing easierAccessory and the mower Bruises, or even put out an eye. Often the perSional service, select a shop that is an Stitutions as service parts. If you need profesAuthorized Service Center for your brand Mower. If you plan to service the unit yourselfUfacturer’s recommended replacement part Position when mowing and bagging. WhenBefore using the grass catcher again When the front of the mower has come upWhile Mowing Steps to Follow Before MowingAfter Mowing Unpacking Instructions PreparationHandle LowerBolt BracketModels with Optional Grass BAG HOW to Empty the Grass BAG HOW to Mount the Grass BAGGrass Bag Top Cover Mulching Tips HOW to Attach the Side Mounted Discharge DeflectorFinal Assembly HOW to Prepare the EngineElectric Start Models Operation HOW to Stop the EngineEngine Stop Lever Front Wheel Drive SystemHOW to Operate the Mower HOW to Start EngineElectric Start Models HOW to Charge the Battery MaintenanceHOW to Remove the Battery Battery BracketHOW to Clean HOW to Adjust Mower Housing Height of CUT Engine MaintenanceLubrication Belt Tension Bolt Drive Belt Belt Tension Bolt Blade Spacer Adjuster NutPulley HOW to Adjust the Drive Cable HOW to Remove the Blade Blade ServiceHOW to Sharpen the Blade Sharpen the blade two times a year or ev- ery 25 hoursCheck the Level of CUT HOW to Prepare Mower for StorageStorage for NON-FOLDING Upper Handles Engine will not start Trouble Shooting Chart040411L 040411L Mulcher Models Description Side Discharge Models 071780 Cover, Dust 043629 Pin, Drive Mulcher Models with 14 Rear Wheels 001x85 Bolt 0020x3 Washer 672916E700 Baffle, Rear 672918 Side Discharge Models with 14 Rear Wheels 17x124 Washer Handle RECOIL-START Models Handle ELECTRIC-START Models Grass BAG Frame Assembly040411L MURRAY, INC. Lawn Mower Central Parts Distributors HOW to Order Repair Parts

22" Self-Propelled specifications

The Murray 22" Self-Propelled Mower is an exceptional piece of lawn care equipment designed to deliver both power and ease of use. With its reliable performance, this mower is perfect for homeowners who value efficiency and ease while maintaining their lawns.

At the heart of the Murray self-propelled mower is its robust 159cc engine, designed to provide the necessary torque to tackle various types of grass, from thick sections to lightly overgrown patches. This powerful engine ensures that users can complete their mowing tasks with minimal interruptions and effort, even in demanding conditions. The self-propelled drive system allows the mower to glide effortlessly across the yard, reducing operator fatigue and making it ideal for larger properties.

One of the standout features of the Murray 22" mower is its adjustable cutting height. With several positions to choose from, users can customize the cutting length to suit their lawn's specific needs, whether it's a close trim or a longer cut for a healthier lawn. The 22-inch cutting deck provides a wide swath, enabling homeowners to cover more ground in less time and reduce the number of passes required to achieve a neat finish.

The mower is designed with user convenience in mind. Its lightweight construction makes it easy to maneuver around flower beds and other obstacles, while the foldable handle allows for compact storage in sheds or garages when not in use. Additionally, the 2-in-1 cutting system offers both mulching and rear-bagging capabilities, giving users the flexibility to choose how they handle clippings.

Equipped with durable wheels, the Murray 22" mower maneuvers smoothly over different terrains. Its rugged tires provide excellent traction, making it suitable for various lawn types, whether flat or slightly sloped. Furthermore, the mower features a reliable recoil starting system, ensuring that it's ready to go when you are.

In terms of maintenance, the Murray self-propelled mower is designed for simplicity. Its easy access to the engine and cutting deck makes routine maintenance tasks like oil changes and blade sharpening straightforward, prolonging the mower's lifespan.

Overall, the Murray 22" Self-Propelled Mower combines power, versatility, and ease of use, making it an attractive option for homeowners seeking an effective solution for their lawn maintenance needs.