ASSEMBLY
HOW TO INSTALL THE SEAT
Use the fasteners shown below to install the seat. The fasteners are shown at full size.
(A) | (B) |
1001054 | 17x47 |
1.Carefully remove the plastic bag from the seat.
2.Align the holes in the seat hinge to the holes in the seat (Figure 4). Fasten the seat to the seat hinge with the fasteners as shown.
3.Check the operating position of the seat. If the seat needs to be adjusted, loosen the two wing bolts. Slide the seat forward or backward along the seat adjusting holes as shown. Tighten the wing bolts (A).
Seat |
|
Seat Hinge | |
| Seat |
Adjusting Hole | |
B | A |
| |
| Figure 4 |
4.Slide the tube into the console (Figure 6). Make sure the end of the tube fits over the steering bushing.
HOW TO ASSEMBLE THE STEERING WHEEL
Fasteners are not required to assemble the steering wheel. Attach the steering wheel as follows:
1.Make sure the front wheels point forward.
2.Place the bellows in position on the console. (Figure 5)
3.Slide the steering wheel and steering post through the bel- lows and console. Make sure the end of the steering post aligns with the pinion gear. Push on the steering wheel. The steering post will lock onto the pinion gear.
Pull on the steering wheel. Make sure that the steering post is locked in place.
Bellows
Console
Figure 5
Steering Wheel | Hub |
| |
| Cover |
Steering Post |
|
Steering Post |
|
Pinion Gear |
|
| Figure 6 |
12 |