Headlight, TrackLockLever, BeforeStarting

Headlight

The headlight is on whenever the engine is running.

TrackLockLever

The track lock lever is located on the right side of the snow thrower and is used to select the position of the auger housing and the method of track operation. Move the lever to the right, then forward or backward to one of the three positions. See Figure 6.

Transport:Raises the front end of the snow thrower for easy transport. Using proper caution, this position may also be used on many gravel driveways to clear snow while leaving gravel undisturbed.

Normal Snow: Allows the tracks to be suspended independently for continuous ground contact.

Packed Snow: Locks the front end of the snow thrower

down to the ground for hard-packed or icy snow conditions.

Lever

Snow

Transport

Snow

Figure 6

SECTION4: OPERATINGYOURSNOWTHROWER

BeforeStarting

all instructions and warnings on the WARNING: Read, understand, and follow machine and in this manual before

operating,

GasAnd0il Fill-up

Service the engine with gasoline and oil as

instructed in the separate engine manual packed with your snow thrower. Read instructions carefully.

handling gasoline. Gasoline is extremely

WARNING: Use extreme care when flammable and the vapors are explosive.

Never fuel machine indoors or while the

engine is hot or running. Extinguish

cigarettes, cigars, pipes and other sources of ignition.

A plastic cup is provided inside the fuel fill opening to protect the tank during manufacturing. Remove and discard. Use the threaded fuel tank cap to close after fill-up.

ToStart Engine

•Attach spark plug wire to spark plug. Make certain the metal loop on end of the spark plug wire (inside the boot) is fastened securely over the metal tip on the spark plug.

•Make certain the fuel shut-off valve, if so equipped, is in the OPEN (vertical) position.

•Make certain the auger and drive controls are in the disengaged (up) position.

•Move throttle control up to FAST position. Insert ignition key into slot and snap in place. See Figure 5. Be certain it snaps into place. Do not turn key.

NOTE: Engine will not start unless ignition key is inserted into ignition slot in carburetor cover.

Electric Starter

•Determine that your house wiring is a three-wire

grounded system. Ask a licensed electrician if you are not certain.

•If your house wiring system is not a three-wire grounded system, do not use this electric starter under any conditions.

equipped with a grounded three-wire

WARNING: The electric starter is power cord and plug and is designed to

operate on 120 volt AC household current. It must be used with a properly grounded three-prong receptacle at all times to avoid the possibility of electric shock. Follow all instructions carefully prior to operating the electric starter.

•If your home electrical system is grounded, but a three-hole receptacle is not available, one should be installed by a licensed electrician before using the electric starter.

•If you have a grounded three-prong receptacle, proceed as follows:

•Connect power cord to switch box on engine. Plug the other end of power cord into a three-prong, 120- volt, grounded, AC receptacle.

1028, 1130 specifications

The Toro 1130 and 1028 snow throwers are robust machines designed to tackle winter's challenges with ease and efficiency. These models stand out for their power, innovative technologies, and user-friendly features, making them ideal choices for homeowners and professionals alike.

One of the primary features of both the Toro 1130 and 1028 is their powerful engine. The 1130 is equipped with a reliable 302cc engine, while the 1028 boasts a 250cc engine, providing ample power to clear deep snow quickly and effectively. The engines are designed for ease of starting, even in frigid temperatures, thanks to features like the electric start option.

Both models feature Toro's exceptional ClearOut technology, which enhances the snow throwers’ performance by improving the throwing distance and reducing clogging. This technology allows users to tackle heavy, wet snow and create a clear path efficiently. The 11-inch impeller and the rugged auger system are engineered to handle a variety of snow conditions, ensuring optimal clearing performance.

The Toro 1130 and 1028 are designed with user comfort in mind. Both models feature adjustable handle heights, allowing operators of different sizes to find the most comfortable position. The ergonomic handles are equipped with rubber grips that reduce fatigue during extended use. Additionally, their compact design makes them easy to maneuver in tight spaces, such as between cars and along walkways.

Another significant characteristic of these snow throwers is their intuitive controls. The one-hand operation feature allows users to easily control the chute direction and speed while managing the throttle. This functionality provides greater control and efficiency, allowing users to maintain focus on the task at hand.

Durability is also a hallmark of the Toro 1130 and 1028. Constructed from high-quality materials, these machines are built to withstand the rigors of winter. The heavy-duty housing and well-designed components ensure that they can handle tough conditions without compromising performance.

In summary, the Toro 1130 and 1028 snow throwers combine power, technology, and user-friendly features to deliver outstanding snow-clearing capabilities. With reliable engines, innovative throwing technology, ergonomic designs, and durability, these models are excellent choices for anyone looking to conquer winter's worst. Whether for residential or commercial use, Toro's commitment to quality makes these snow throwers a trusted option for snow management.