Murray 405000x8E manual HOW to Adjust the Shift Lever

Page 25

MAINTENANCE

HOW TO ADJUST THE SHIFT LEVER

If the NEUTRAL position on the shift lever does not match neutral on the gearbox, adjust the shift lever as follows.

1.Stop the engine.

2.Disconnect the adjuster nut from the shifter bracket (Figure 18).

3.Make sure the shift lever is in the NEUTRAL position.

4.Push the unit forward. Make sure the gearbox is in neutral.

5.To align the adjuster nut with the hole in the shifter bracket, turn the adjuster nut.

6.Connect the adjuster nut to the shifter bracket.

7.Make sure the NEUTRAL position on the shift lever matches neutral on the gearbox.

Shift Lever

 

Shift

 

Link

Adjuster Nut

 

 

Shifter

 

Bracket

 

Hair

 

Pin

Motion Drive Belt

 

 

Figure 18

MAINTENANCE FREE BATTERY

HOW TO REMOVE THE BATTERY

To charge or clean the battery, remove the battery from the unit as follows.

WARNING: To prevent sparks, disconnect the black battery cable from the negative (-) terminal before you disconnect the red cable.

WARNING: The battery contains sulfuric acid which is harmful to the skin, eyes and clothing. If the acid gets on the body or clothing, wash with water.

1.Disconnect the black cable from the negative (-) terminal (Figure 19).

2.Disconnect the red cable from the positive (+) terminal.

3.Lift the battery tray and the battery out of the unit.

HOW TO CLEAN THE BATTERY

1.Remove the battery.

2.Wash the battery with a solution of one gallon of water and four tablespoons of baking soda (sodium bicarbonate). Make sure the solution does not get into the battery cells.

3.Clean the terminals and the ends of the cables with a wire brush.

4.Install the battery.

5.To prevent corrosion, apply grease to the battery terminals.

HOW TO CHARGE THE BATTERY

WARNING: When you charge the battery, do not smoke. Keep the battery away from any sparks. The fumes from the battery acid can cause an explosion.

1.Before you charge the battery, remove the battery.

2.To charge the battery, use a 12 volt battery charger. Charge at a rate of 6 amperes for 1 hour.

3.Install the battery.

WARNING: To prevent sparks, fasten the red cable to the positive (+) terminal before you connect the black cable.

4.Fasten the red cable to the positive (+) terminal with the fas- teners as shown.

5.Fasten the black cable to the negative (-) terminal with the fas- teners as shown.

 

Positive (+)

 

 

Terminal

 

Wing Nut

 

Red Cable

 

 

Carriage Bolt

 

 

Battery

Black Cable

 

Battery Tray

 

 

 

Carriage Bolt

Figure 19

 

 

F-050700L

25

Image 25
Contents Model Table of Contents Responsibility of the Owner OWNER’S InformationII. Slope operation Safe Mowing Guide Safe Mowing Guide Safe Mowing Guide Before Mowing Steps to FollowInternational Pictorials International PictorialsAssembly AssemblyHOW to Assemble the Steering Wheel HOW to Install the SeatHOW to Charge Maintenance Free Battery Maintenance Free BatteryHOW to Install the Battery Cables Check the Level of the Mower Housing HOW to Prepare the EngineIMPORTANT! Before YOU Start Mowing Check the TiresLocation of Controls OperationLift Lever HOW to Operate the Ignition KEY Switch Electrical Safety SystemHOW to USE the Throttle Control AttachmentsHOW to USE the Shift Lever HOW to USE Blade Rotation ControlHOW to Change the Cutting Height HOW to SET the Parking BrakeHOW to Stop the Unit HOW to Transport the UnitHOW to Operate the Unit on Hills HOW to Operate with the Mower HousingBefore Starting the Engine HOW to Start the EngineCarburetor Mowing and Bagging Tips Operating TipsMaintenance Chart MaintenanceHOW to Check the Muffler General RecommendationsHOW to Sharpen the Blade HOW to Remove and Install the BladeInspect Blade HOW to Adjust the Blade Rotation Control HOW to Check and Adjust the Drive Brake HOW to Check and Adjust the ClutchDisconnect the adjuster nut from the shifter bracket Figure HOW to Adjust the Shift LeverHOW to Check the Fuel Filter Where to LubricateHOW to Install the Mower Housing HOW to Remove the Mower HousingHOW to Level the Mower Housing Removal HOW to Replace Motion Drive BeltInstallation HOW to Replace the Mower Drive Belt Front Wheel HOW to Install the WheelsHOW to Replace the Light Bulb HOW to Replace the FuseHOW to Clean the Mower Housing BatteryProblem The engine will not start Trouble Shooting ChartMURRAY, INC. Lawn Mower Central Parts Distributors Chassis & Hood Repair PartsKey Description Motion Drive Motion Drive Steering Steering Mower Housing Suspension Repair Parts Mower Housing Includes Key No , 18, 30, 31, 32, 33, 45, 46, 47 Repair Parts Engine Mount Engine Mount Wiring Harness for Electrical System 050700L Index Lawn Tractor Accessories

405000x8E specifications

The Murray 405000x8E is an innovative product that has garnered significant attention in various industries due to its advanced features, technologies, and user-friendly characteristics. Designed for efficiency and performance, the 405000x8E combines cutting-edge engineering with practical applications, making it a valuable asset for professionals seeking reliable solutions.

One of the main features of the Murray 405000x8E is its robust construction, which ensures durability and longevity even in demanding environments. This product is built with high-quality materials that can withstand harsh conditions, making it suitable for a range of applications from industrial to commercial use. Users appreciate the reliable performance that the 405000x8E consistently delivers over time.

In terms of technology, the Murray 405000x8E incorporates state-of-the-art components that enhance its functionality. It features a powerful processing unit that allows for quick data handling and processing, contributing to increased productivity. The integration of smart technology enables real-time monitoring and adjustments, providing users with greater control and flexibility. This smart technology aspect is particularly advantageous for industries that require precise data analysis and quick decision-making.

Another notable characteristic of the Murray 405000x8E is its energy efficiency. Designed with sustainability in mind, this product minimizes energy consumption without compromising on performance. The incorporation of energy-efficient technologies not only reduces operating costs but also supports eco-friendly practices, making it an attractive choice for environmentally conscious users.

User-friendliness is a core element of the Murray 405000x8E. The intuitive interface ensures that operators can quickly familiarize themselves with the system, reducing the learning curve and minimizing the potential for operational errors. Additionally, the product is designed for easy maintenance, with accessible components that simplify troubleshooting and repairs, ultimately leading to reduced downtime.

Overall, the Murray 405000x8E stands out in the market for its combination of durability, advanced technology, energy efficiency, and user-centric design. Whether for industrial applications, commercial ventures, or any other demanding fields, the 405000x8E is a reliable solution that meets the diverse needs of its users. As industries continue to evolve, products like the Murray 405000x8E will play a pivotal role in shaping efficient and sustainable operations.